Dark color inkjet heat transfer paper

 Product character:

  The product is USA’s original pack import paper, fitting transfer printed image on light color garments. You may use transfer ink or common (dye or pigment) ink. The image has true color rendition, brilliant color, clear detail on print, well glossy, stabilized quality; good elasticity, no crinkle, no crazing when tearing at it. Superexcellent handle, no massiness feeling. The quality is so good that the domestic products can’t achieve. It is your best choice to printed individualities image on garments! You may transfer printed image on cotton, cotton-blends, and polyester or terylene, including T-shirts, hat, sweater, mousepads and so on. Do not fall off and lose color when washing by water.

Image printing.

1.Printed the image with inkjet printer, you may use common ink.

2.You can draw image on the paper by crayon, color pencil etc.

3.Choosing reasonable printer settings according to it’s direction for use, usually choosing the best printed effect in normal mode. For example: EPSON printer’s setting: chose photo, common paper as paper type, mirror image.

  4. Allow the printed image to dry by nature.

Transfer printing method.

1. After the transfer is completely dry, trim around the image, leaving a small clear edge (5mm) around the image.

2. Use level inelastic surface as transfer workbench, please do not use ironing board which have elasticity is not good for image conglutination.

3.For the limited heat of the iron, you may not use it to transfer big size (above about 20*30cm). It is better for higher power, and the iron must be adjust.

4.First adjust the iron to cotton temperature (about 185°C),heat in advance to the heat preservation light, close the steam. Not enough temperature or use steam will affect the transfer effect.

  5. Making the garments neatness before applying the transfer. Put the garments on workbench evenly, iron the transfer part several seconds to remove moisture. 

  6. Work on white or light color, 100% cotton or cotton blend fabrics or   terylene garments, not black or other deep color garments.

  7. Let the printed side stick on the T-shirts, ironing come-and-go in length and breadth with much pressure, keep about 20 seconds (the time is adjust according to image size). You’d better use the back of the electric iron (it has higher temperature), and give the most pressure when ironing transfer border.

8. To achieve the best transfer effect, you’d better use the heat transfer press machine. Set temperature to about 185-195°C, the time is about 20-30 seconds (more higher temperature, more good hand feeling).

9. Hot peel (peel within ten seconds), warm, cold peel.

 Lavation.

  1. It is best to wait 24 hours (common ink need 48 hours) before washing the first time.

  2. You’d better wash singly in cold water with a mild detergent and no bleach. Do not wash with other garments. You’d better not use washing-machine. Do not knead heavily. Do not dip in for long time. Do not dry wash.

  3. Turn the T-shirt inside out before washing, you do not wash the image directly.

Iron.

  1. After washing, air it in shadow and dry place, do not dry by washing machine or hand or strong sun shine.

2. Iron garments with mild temperature, do not iron directly over the image.

3. Hang up or other way to make sure keep the garments level up after ironing.

Note:

Keep environment: relative humidity35%-65%, temperature 10-30

°C.