pultrusion fiberglass surfacing tissue

Specifications

1.ISO9001&FDA&BSI&GL
2.better surface property
3.rapid wet-through and out
4.waterproof property

                        Pultrusion fiberglass surfacing tissue 

 

The pultrusion surfacing tissue is mainly used in the surface reinforcement of FRP  pipe ,coreboard and other structural section .It is characterized by uniform fiber dispatible with resin ,but keeping the strength after soaked by resin .Meanwhile ,the formed product not turns  white ,characterized by high strength ,smooth surface ,uniform color and long lifetime.So  this product is the excellent surface reinforcement material for FRP pultrusion .

 

The gram weight we can produce are 20g/m2, 30g/m2, 45g/m2, 50g/m2, 60g/m2, 80g/m2, 100g/m2, 260g/m2, etc. And width is 1m or 2m. Length can be various from 250m to 3000m.

 

The specifications are as follows:

20g/m2, 1mx 500m/roll, roll diameter: 0.39m   

30g/m2, 1mx 400m/roll, roll diameter: 0.395m  

40g/m2, 1mx 300m/roll, roll diameter: 0.40m   

50g/m2, 1mx 250m/roll, roll diameter: 0.41m