Fish Equipment Flake Ice Machine with Water cooled Evaporator

1.The temperature of ice is lower and it can reach -6°c.

2.Ice is dry and transparent, good looking shape, non-caked, good mobility and sanitary.

3.Flake shape has no sharp edges, cannot destroy refrigerating products, and it is beneficial for storage and transportation.

4.The thickness of flake ice is 1mm-2mm.No need to crush and can use at any time.

5. Daily capacity of ice flake machine can be from 0.5ton to 60tons.

• Higher refrigeration efficiency and lower loss of refrigeration capacity: Autmatic flake ice machine adopts the latest vertical evaporatoe with inner helix ice cutter. In the process of ice making,the water distribution device in ice maker sprays water even on the internal surface of ice maker to frozen in a short time. After ice formed,the helix ice cutter drops down and cut ice. In this method,it makes a full use of evaporator and increase the efficiency of the ice making.
• High quality,dry and non-caked: The thickness of flake ice which produced by automatic plate ice machien with vertical evaporator is about 1mm to 2mm. The ice shape is irregular flake ice and it has good mobility;
• Simple structue and small land area: The series of ice flat has different kinds including fresh water type,seawater type,fixed cold source type,equip cold source by customer,and ice flat machine with cold room. And the daliy capacity ranges from 500kg to 60000kg. Customers can choose suitable machine according to site and different water quality. Compared to traditional ice making machine,it has advantage of small land area and low operation cost(no man for ice harvest)
• Optional Equipment:Our flake ice maker machine can be equipped with automatic ice spreading system,special ice packing system and flake ice storage room.