High Power Amplifier GSM Wireless Signal Repeater Booster 2g 3g 4g

KingtoneRepeater                                                                    

Why choose us?

1.- The High Power GSM Repeater from Kingtone allows operators the option of amplifying two desired bands in two different systems. Working bands for both systems can be customized and different output power models can be selected according to the required coverage area.

- The gsm repeater is versatile and competitive in design to optimize cell coverage and to enhance cell signals of shadowing areas. It is commonly used for synthesized frequency hopping system.

2.-Kingtone was established in 2006, located in Quanzhou, China. It is a leading manufactory specializing in wireless network telecommunication equipment and dedicated to R&D, manufacture,s alses and services of outdoor and indoor repeater and revelent products.

3.-Kingtone pays special attention to R&D, innovation, quality system and brand building. We have achieved 7 software copyright certificates registered by the State Copyright Bureau and passed the ISO9001:2008 quality management system. Own four Brands have been registered by the State Trademark Bureau and we have been recognized as "innovative and high technology enterprises " by Fujian Science and Technology Department in 2010.

Kingtone Repeater Service                                   

Kingtone offers a complete range of repeaters (bidirectional amplifiers or BDA) 

able to cover all needs 

  2g 3g 4g GSM900 Repeater,

2g 3g 4g CDMA800 Repeater

2g 4g DCS/LTE1800 Repeater,

2g PCS1900 Repeater

UMTS/WCDMA2100 Repeater ,

4G LTE700 2300 2600 repeater

iDEN Repeater / Tetra Repeater / ICS Repeater / UHF Repeater / FM Radio Repeater 

 Kingtone Repeater Solutions:                              

The Kingtone Repeater solution also allows :

• to extend the signal coverage of a BTS in urban and rural
• to fill the white areas in rural and mountainous areas
• to insure coverage of infrastructure such as tunnels, shopping malls, 
• parking garages, office buildings, hangars companies, factories, etc                                                        

The advantages of the repeater are :

• Low cost compared to a BTS
• Easy installation and use
• High reliability

   Kingtone Repeater Features:                             

*Receiving and sending separation,low require for Ant isolation,making it 

convenient for installation.

 *Mini design with metal cavity filter technology inside.

 *Full-duplex&dual-port design,and built-in power supply,making it convenient  for installation.

 *Allowing for continuous gain adjustment 31dB by 1dB step.

 *ALC technology used to provide auto amplitude fixing.

 Modules structures,making it convenient for installation,debugging and maintenance      

Items

Testing Condition

Specification

2G/3G/4G signal booster/repeater

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

Gain(dB) 

Nominal Output Power-5dB

95±3

Output Power (dBm)

GSM modulating signal

33

40

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-band(Max. Gain)

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

Time Delay (us)

Working in-band

≤5

Peak Phase Error(°)

Working in-band

≤20

RMS Phase Error (°)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power-5dB

±1.5

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery