FRANKEVER wireless car logo laser projector light 3W for car door

     FRANKEVER wireless car logo laser projector light 3W for car door

Installations:

1. Install instruction about the batteries. Put 3pieces AAA (1.5V) batteries in the battery case and install them according the positive & negative that marked in the case. Then close the batteries case jacket.
2. Install instruction of the shadow light. Stick the Magnet on the bottom of the car frame. Stick the Car light on the car door. The distance between the Magnet & Car light is about 10mm. When close the car door, the Magnet is at the underface of the sensor in the car logo light.
3. Automatic Control & Manual Control.

•          When you open the door, the logo will be shown on the ground, and it will be off automatically after lighting on 2minutes.
•           If you want to off the light, just need to press the button on the head of the light. When the light is off with the car door open, you can also press the button to control the light on. And the light will be also off automatically after lighting on 2minutes.
•           Some cars can not stick the Magnet on the car frame as there is no space for it. So it can only use Manual Control