Specifications

PWM RGB LED Amplifier
PWM LED Amplifier
Mini RGB PWM Amplifier

                                  Mini RGB Amplifier/PWM RGB LED AMPLIFIER

 

 

 

Summary of  Mini RGB Amplifier/PWM RGB LED AMPLIFIER

 

  If you need to operate long or multiple lengths of RGB LED strip and want to use just one remote controller to synchronise the effects then the amplifier is for you.You will need one controller in any case to create the effects and colours of the RGB LED strip and then think of the amplifier as a slave to this controller.
The amplifier is required to be connected to the controller, utilising the RGB and positive cables, these will carry the signal commands as an input to the amplifier.
The amplifier also has a 12v input and output of RGB and positive cables to the next run of strip.The output capacity of the amplifier is 144w, you can therefore use the amplifier to run up to 20m of RGB LED strip. You will need the correct sized driver to accommodate this output, in this case, the 150w LED driver.
The amplifier has two fixing points situated on the base so the unit can be concealed.The green connector blocks are removable to enable easy cable connections. Once cabled they just push back into the amplifier housing.  

 

 

Mini RGB Amplifier/PWM RGB LED AMPLIFIER

This amplifier is required for operating long or multiple lengths of LED strip lighting with just one colour controller (or dimmer switch) to synchronise the colour/light level. Think of this amplifier as a slave to the colour controller/dimmer.

Input Voltage: 12 V DC (12V jack plug) or terminal connection. 
Output Voltage:12V or 24V DC 
Output Power: 144W using 12V or 288W using 24V 
Output type: 12V or 24V DC

This amplifier has the capacity to power upto 144 Watts of 12V LED lighting or 288 Watts of 24V LED lighting. This amplifier requires an LED driver to power it. The power output of this amplifier is limited by the power output of the LED driver. To power 144 Watts of LED lighting you would need to use 150 watt LED driver.

The amplifier has two fixing points situated on the base so the unit can be concealed.

The green connector blocks are removable to enable easy cable connections. Once cabled they just push back into the amplifier housing.

 

Mini RGB Amplifier/PWM RGB LED AMPLIFIER

 

It is used to receive RGB signal from LED controller and send the signal to another group of LED source.

 

 

 

 

 

 

Packing:

 

1pc in white box, White box:L115mmxW70mmxH39mm   

 

100pcs/carton, carton size:L19.2'*W15'*H8.9'/1.48'                                             

 

 

 

Our Advantages:

1. Ex-factory price

2. 3 year quality warranty

3. more than 4 years experience in developing LED controller and LED strips

4.  Familiar with international market and offer OEM and ODM

5.  Professional engineer serving for you

 

 

 

...