Tire sealant repair for Auto (TS-600C)

Features

1. It is made of organic polymer materials, which is neutral and is of no corrosion to metals or rubber.

2. Added one time into the tyre and Stops up to 60 leakages.

3. It can cover the breach within 6mm.

4. Good leveling to automatically seek-out the leakage in seconds.

5. No volatile, non-flammable, anti-freezing. Long lasting effect. 

Direction

1. Tires should be properly balanced (if required). Installation should be done with inflator. The tire should be re-inflated to recommended operating pressure. All tires should have similar pressure.
2. Position the tire valve stem at 5 or 7 o'clock.
3. Cut off the nozzle-spout about 1/4'' back so it will fit into the tubing. Insert the nozzle into the tubing.
4. Place the tubing over the tire vavle stem and squeeze in the required amount of  sealant. Do not over apply   sealant to high speed tires.
5. Clear valve stem with a shot of air or a thin wire (paper clip). Re-install the valve core and inflate the tire to recommend pressure noted on the sidewall of the tire.
6. If the tire is already punctures to form a seal. Inspect tires periodically and remove puncturing objects.
7. After removing puncturing objects, immediately drive the vehicle a short distance to allow the tread to flex and force the sealant into the puncture to form apermanent seal.

Used Volume

 200ml for one repair of bicycle tyre;

 380ml for one repair of motorcycle tyre;

 600ml for one repair of normal car tyre.

 Packing

30pcs/CTN

 Our factory

We have passed American ASTM Standard, European EN71 Standard, SGS Certificate and Quality Management System ISO9001: 2000. Our products are focused on environmental protection. We are able to provide products that meet your strict requirements. Our products reflect our dedication in each critical step of production process, including artwork design, manufacture, fill, pack and transport. We offer our perfect products to satisfy all valued customers with both the best quality and competitive prices. We are committed to providing you with the most suitable products and make you more appealing to ultimate consumers.

Hopson Chemical Industry Limited is a specialized adhesives and high technology manufactory which located at east China of Ningbo City. We are mainly a supplier of cyanoacrylate adhesives, epoxy resins, tire repair cements and other chemicals for Chinese leading market. We have more than ten years of experience in the research and development of high property adhesives and high molecular chemicals and kept this sector for its highest technological level.

We welcome you to inquire us by call or mail and hope to build a successful cooperation relationship.

 Sample

 We offer free samples within 2 pieces.

Samples should be sent after we receive your courier fee.