2014 New Products from China Factory Sand Maker (PCL-900A) with High Capacity 55-100t/h

Specifications

1.High capacity:55-100t/h
2.max feed size:40mm
3.Impeller speed:1200-2000r/min
4.Power:2*55kw
5.Made in China

Sand Making Machine

 

Sand Maker Features

1. Simple structure and low operating cost;
2. High crushing ratio with low consumption;
3. Function of fine crushing and crude grinding;
4. Slightly influenced by moisture content of material, and the max moisture content is about 8%;
5. More suitable for crushing mid-hardness and hardness materials;
6. Cubic shape of final products, high density of piling up and low iron pollution;
7. More wearable and easier maintenance;
8. Low working noise (lower than 75 decibel) and light dust pollution.

 

Sand Maker working Principal

 

The stones fall from the top of the machine, and then it is divided into two parts by material-dividing plate. One enters into high speed rotating impeller through the center of material-dividing plate. The other falls down from outside of material-dividing plate. Under the action of the high speed centrifugal force, the stones crushed the other distributed around the impeller in the form of umbrella. After the stones impact each other, the eddying motion is formed between the impeller and main case to bring about many times mutual, rubbing, and crushing till the granularity required is achieved.

 

 

Main Technical Parameters

Model	Impeller Speed(r/min)	Max Feed Size(mm)	Capacity(t/h)	Power(kw)	Weight(t)	Overall Dimension(mm)
PCL-600	2000-3000	30	12-30	2*30	5.6	2800*1500*2030
PCL- 750	1500-2500	35	25-55	2*45	7.3	3300*Φ1800*2440
PCL- 900A	1200-2000	40	55-10	2*55	12.1	3750* Φ2120*2660
PCL- 900B	1000-1450	40	65-130	2*75	13.6	3750*Φ2300*2029
PCL-1050	1000-1700	45	100-160	2*(90-110)	16.9	4480*Φ2450*2906
PCL- 1250	850-1450	45	160-300	2*(132-180)	22	4563*Φ2650*3716
PCL- 1350	800-1193	50	200-360	2*(180-220)	26	5340*Φ2940*3650