New Generation!!A-bomb 800 Yards Dog Training Collar Rechargeable Rainproof & Intensity Adjustable E-Collar with Static Vibrati

A-bomb Full-automatic mode&Manually 800 Yards Pet Training Collar Rechargeable & Waterproof & Safe Vibrating Collar

MORE PICTURES for Pet training collar:

More Details about the Dog Training Collar Remote:

1.LCD Screen:
       The LCD Screen will display different modes of the collar and the different channels for two collar receivers as well as battery indicator.
       Channel 1: Indicates the selection of the first collar receiver.
       Channel 2: Indicates the selection of the second collar receiver.
2.Static Button: Pressing the “Static ”button, the receiver will
   emit shock.
3.Vibration Button: Pressing the “Vibration” button, the
   receiver will vibrate.
4.Beep Button: Pressing the “Beep” button, the receiver will
   emit a beep sound.
5.Automatic Button:Pressing the “Automation” button, the
   receiver will change to automatic mode.
6.Up/down Buttons: Selects intensity level of       
    the  vibration and static Shock ,Selects the sensitiviy of  automatic 
    mode.
7. Channel Button: Pressing this “1/2”button will swap between the
   first and second collar receiver.
8. Universal Button: Sends the signal from transmitter to receiver,
   resulting in stimulation,depending on your mode selection.
9.Turn on/off the transmitter:Turn on/off the transmitter by press the
   “Power”button one time.
10.Charging port: Insert charging cable into charging port to
    charge the Transmitter.
11. .Turn on/off the Receiver:Turn on/off the receiver by press the
    “Power” button one time.
12. DV-5V hole: Insert charging cable into DC-5V port to charge 
     the receiver.

HOW TO USE:
Note: Please charge before using the product!
1.Charge the remote transmitter:
  1) Connect the charger cable to the charging port.
  2) Plug the charger into a standard outlet.
  3)The icon of battery will flash.
  4) Charge the transmitter for about one hour for the first charge or
       until the icon of battery stops flashing.
2.Charge the collar receiver:
  1) Connect the charger cable to the DC-5V port.
  2) Plug the charger into a standard wall outlet.
  3) The red light will flash on the receiver
     (If  not or green light ,please plug the charger again).
  4) Charge the receiver for about one hour for the first charge  or    
      until the light indicates charging is completed.
3.Connect transmitter and receiver
  1) Turn on the transmitter.
  2) Press "1/2" button to choose channel 1 for pairing.
  3)Turn on the receiver
  4)Press the "Power"button on the receiver again.
  5) After a beep from the receiver, press the "Vibartion button" within 30 seconds for pairing.
  6) The collar receiver will beep if connected successfully.
  7)If the pairing were not successful, please repeat the 3-5 steps.
  8) To encode the second receiver, press the "1/2"button and 
      select for the second receiver and follow the same procedure.

  A-bomb Full-automatic mode&Manually 800 Yards Pet Training Collar Rechargeable & Waterproof & Safe Vibrating Collar