giant cheap polymer jumbo walk on water plastic ball Inflatable Water Walking Ball for sale

giant cheap polymer jumbo walk on water plastice ball Inflatable Water Walking Ball for sale 

Human sized hamster ball/Water walking ball/Inflatable water ball

The inflatable water walking ball is frequently used in water, water pool, Amusement park, leisure center, kindergarten, home yard, birthday party, festival activities, commerce promotion and so on. The water plastic ball can be used for rental and resell. Water walking ball are very hot selling in hot summer.

Features of our bumper ball

1.Easy inflate or deflate.
2.Steady handle and soft cotton harness
3.Inner diameter could be customized for suitable different people.
4. Logo printing or customized design is acceptable.
5.At least Double& Triple Stitched, Reinforced Seams.
6.Strength ~ Durability ~ Longevity
7.Built to withstand commercial use like rentals.

The TIZIP WaterSeal is made from a strong plastic coil zipper on a high strength fabric. Every coil half is safely embedded and secured in a plastic profile. When the TIZIP WaterSeal is closed, the sealing lips above and below the coil are compressed making a perfect seal. The entire plastic profile is highly abrasion resistant. The unique design prevents the slider from wearing down the sealing lips when the zipper is opened or closed.

Direction for Use:

1, Please use lubricant for zip to open the ball;
2, People go inside the ball (1 or 2 at most)
3, Use the air pump to inflate the water ball fully;
4, Close the zip tightly and let the ball go into water via slope.

Maintain & Storage:

1) Disinfect and clean the ball regularly.
2) Check the ball before using. Any damage, please mend it with our repairing kit and glue.
3) After use, please remove sundries outside and inside the ball.
4) Before packing, make sure the ball is clean and dry. Then store it in cool and dry place.

How to Repair?

1) Find out exactly where the leak is. Fill a spray bottle with a mixture of soap and water and spray it liberally on the zorb along the seams. You will notice that the solution starts to bubble up where the leak is located, so take note of the position on the hole.
2) Prepare the hole for patching. Dry the seam off, and make sure that it is completely deflated before attempting to patch the seam. If you have the patch kit that came with the zorb, you can use the prep solution to thoroughly clean the rubber before proceeding. Rubbing alcohol also works.
3) Apply plumber's goop liberally to the seam and let it dry for about 15minutes. If possible, apply some goop to the inside of the seam as well, so that it spreads out and gives an extra layer of protection when the zorb pressurizes.
4) Fill the zorb about halfway with air and wait another 30minutes or so to make sure that the goop has dried completely.
5) Inflate the item completely and spray it again with the soap and water mixture to make sure that the hole is indeed fixed.

Warning:

1. Those who have heart diseases or the hypertension, as well as the physique weaker do not suitably participate in this activity.
2. Do not leave children unattended during play.
3. The Walk-on-water Ball is sealed, it is isolated from the outside, the air inside the ball does not circulate. The oxygen is limited. When people do exercises, they consume oxygen more than 10 times compared with ordinary time. Therefore the player can not stay in the ball for a long time. The best time the player can stay in the ball is less than 10 minutes. Another hand the number of player in one ball can not surpass two person.
4. These things the player carries about such as mobile phones,glasses ,keys or some sharp stuffs and so on should not be take into the ball in order to avoid cutting the ball or wounding the rider’s body in tumbling.
5. When you inflate the ball, you must make sure that there is no sharp things on the ground.You had better put the ball on the blanket or tarpaulin,when inflating.
6. If the wind is above 5 levels and the wave is higher than 0.5m, please do not carry on this activity.

Shanghai Haotong Amusement Equipment Co., Ltd.

Shanghai Haotong amusement equipment co., Ltd. is located in Pudong New Area the most dynamic region of Shanghai city, and Shanghai is the largest industrial city of China. We just six kilometers away from Shanghai Disneyland, only 15 kilometers to Pudong international airport, and near to the Shanghai-Chengdu, Shenjiahu expressway, are having very convenient transportation and beautiful environment. Shanghai Haotong owned nearly ten thousands of square meters specialized factory, and more than three thousands of square meters office, most of our products was protected by national patents.
Shanghai Haotong amusement equipment co., LTD. is a professional enterprise, which is engaging in developing, designing, producing and marketing varieties of amusement equipment for more than 10 years. Haotong has always been in line with "Sincerity oriented, quality strives for the development, continuous innovation, efforts to develop domestic and international market" and take it as principles and train of thought to make "Haotong" brand. Strive to create more happiness amusement products for children around the world; sincere welcome whole world friends join hands to create a better future!