Universal Computer Charger Adapter for Laptop ESD-L6S20 25.2V 2A

Model

         SYB-L2530

Output

DC output voltage

25.2v

Output voltage tolerance

±5%

Rated output current

2A

Output current range

0~2A

Output power

51.8W

Ripple and noise

100mVp-p

Line regulation

±0.5%

LED indicator

Green LED ON<150~200mA

Setup rise hold up time

500ms,50ms,16ms at full load

Input

Input voltage range

100~240VAC 140~350VDC

AC input current

0.2A/230VAC

Efficiency

80%

AC inrush current

3A/230VAC

Leakage current

<3.5mA

Frequency range

50~60Hz

Protection

characteristic

Over load protection

105%~150%rated output power

Protection mode : FOLDBACK limiting output reset: auto recovery

Environment

Working temperature

0°C~+50°C

Working humidity

20%~90% RH non-considering

Storage Temp,humidity

-10°C~+60°C

efficient

±0.03% /°C(0~50°C)

Vibration

10 ~ 500Hz, 2G10min / 1 cycle, duration 60 minutes, each axis

Safety

Withstand voltage

I/P-O/P:3000 VDC

Safety standards

EN60950

Insulation resistance

I/P-O/P:100M Ohms/500VDC/25°C/70%RH

Harmonic current

Compliance to EN55024, EN61000-3-3

EMS immunity

Compliance to EN61000-3-3

Others

Weight/Packing

0.087kg/100PCS/10.2kg

Dimension

74.5*29*78.3MM

Connector

Plug

5.5X2.1mm

Cable

1.5m

Remark:1.All parameters are specified at 230VAC input, rated load, 27°C 70%RH ambient.

2. Ripple and noise are measured at 20MHz by using a 12 inch Twisted pair terminated with 0.1u and 47u capacitor.

3. Tolerance: includes set up tolerance, line regulation, load regulation.

4. DC voltage : the output voltage set at point measure by plug terminal &50% load.

5.Line regulation is measured from low line to high line at rated load.

6.Load regulation is measured from 20% to 100% rated load.

7.The power supply is considered a component which will be installed into a final equipment .The final equipment must be re-confirmed that it stills meets EMC directives.