warranty 3 ip65 outdoor 50w led flood light gz

Specifications

Protection Grade:IP65
Material:Die-casting aluminum body, high-purity aluminum Reflector, tempered glass
Color:Any

Parameters

Item No.	XY-154
Protection grade	IP 65
Protection	1
Sutiable source	400W
Product size	670*350*200mm
Installation diameter	φ60
For height	5m-12m
Body	Die casting aluminum
Reflector	High -purity aluminum,anodized and polished finishing
Reflector thickness	0.2,0.3,0.4,0.6,0.8,1.0,1.2mm
Glass	Tempered glass/Toughened Glass
Locker	stainless steel
Base	E27 E39 E40
Sealing	Silicon gasket between glass and reflector
Coating	sprayed with plastics outdoor
Light source	high pressure sodium lamp,metal halide lamp,energy saving lamp,mercury lamp

IP65/66 :silicon gasket between the reflector and glass

         silicon gasket between the up and down die casting aluminum body

 

         cheap one and high temperature resistant

 

there are cheap and good gasket for your choice

 

free /normal /high temperature resistant

 

No.1:for free,if you needed,pls tell us while give us order

 

Material:  aluminum-----local material or ZL102  standard

                 reflector-------local or AL1090 standard

 

 Color:any color available,local & imported powder choice,anti-corrosion

           for the good price one,the inside are not coated.

 

 

Grain size:(1)smooth,  (2)fine grain,      (3)coarse grain

 

Reflector:

1. regular reflector (E27/E39/E40) for high pressure sodium lamp/metal halide lamp/mercury lamp/energy saving lamp
2. flat reflector for LED  
3. die casting aluminum reflector G12 for ceramic metal halide lamp

 

this year,we have new thought about the LED light fixture,not only change the traditional reflector to the flat reflector,

 

we have the below designs with hole for heat dissipation,the cost is much lower than the LED  light fixure.

 

and for the traditional light fixture,you could open holes on the surface too.round or square

 

 

  the terminal with high temperature resistant lines

 

 

 

 

respirator

 

Special ventilation design, effectively reduce the electrical operating temperature. Lamp holder parts have function of automatic respirator ,guarantee the lamp life.

Reflector & glass:reflector workshop below

 

Factory photos

 

Step 1:die casting aluminum parts 

 

 Step 2:Coating 

 

Step 3:Packing 

 

• reglar packing without foam,just inside plastic bag and outside carton
• for big radian glass,we will pack the glass and foam seperatly
• high request packing plastic bag ,outside carton box with foam

Materials & Characters

 

Die casting aluminum body,smooth and simple construction

 

High -purity aluminum reflector,anodized and polished finishing to ensuretable optical performance.

 

Tempered glass,featuring good transparency

 

Anticorrosion static power coating surface treatment

 

color:any color based on regular quality

 

silicon gasket between glass and reflector,and the up and down parts,ensure high sealing performance

 

stainless locker

 

base:E40/E27

 

Insulation grade:class 1

 

Protection grade:IP65

 

Installment diameter:Φ48/60

 

photocell