Contact Platform Support
Help CenterGR165 Motor Grader
Related Products
GR165 Motor Grader
The XCMG GR Series Motor Graders are mainly used in grond leveling, canalling, slopeing, earthmoving, scarification or snow removal work on road, airfield, farmland, and so on. They are necessary construction machines for national defence engineering, mine construction, town and country roads building, and farmland improvement.
Performance and characteristic:
1. New appearance design.
2. The articulation frame is adopted and macthed with the steering of the front wheel, with small turning radius, maneuvering and flexible.
3. The electro-hydraulic contrals the power shift gearbox, with 6 ahead box and 3 back gears.
4. The international mataching hydraulic parts are adopted, with reliable operation.
5. The motions of the knife are fully hydraulically controlled.
6. The rear axle is the three-section driving axle which is provide with the NO-SPIN self-locking differential mechanism.
7. The manipulation table and seats are adjustable. The arrgement of the manipulation handle and instruments are reasonable, with convenient application, and the comfprt of driving is improved.
8. The cab is grand and nice, with wide eyeshot and good sealing.
9. The front bolldozing plate,rear scarification device, front scarification harrow and automatic leveling device can be added.
| Basic specification | |
| Engine model | 6BTA5.9/SC8D170G2B1 |
| Rated power/speed | 125kW/2300rpm |
| Dimension(LxWxH) | 8900×2625×3470mm |
| Operating weight(Standard) | 15000kg |
| Performance specification | |
| Travelling speed, forward | 5, 8, 11, 19, 23, 38 km/h |
| Travelling speed, reverse | 5, 11, 23 km/h |
| Tractive force(f=0.75) | 77KN |
| Max. gradeability | 20% |
| Tire inflation pressure | 260 kPa |
| Working hydraulic pressure | 16 MPa |
| Transmission pressure | 1.3~1.8MPa |
| Operating specification | |
| Max. steering angle of front wheels | ±50° |
| Max. lean angle of front wheels | ±17° |
| Max. oscillation angle of front axle | ±15° |
| Max. oscillation angle of balance box | 15 |
| Frame articulation angle | ±27° |
| Min. turning radius using articulation | 7.3m |
| Blade | |
| Maximum lift above ground | 450mm |
| Maximum depth of cutting | 500mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°—70° |
| Circle reversing rotation | 360° |
| Moldboard width X height | 3965×610mm |
Thank you for your inquiry!
Send Inquiry to This Supplier
You May Also Like
-
MG 1320C Motor Grader Medium Motor Grader PartsUS$ 1,000 - 100,000MOQ: 1 Set
-
Loader Tire 17.5-25 Solid Tires for Liugong Motor Grader CLG4165 4180 4215 4230US$ 200 - 1,000MOQ: 4 Pieces
-
SANY Motor Grader SHG190US$ 10,000 - 50,000MOQ: 1 Set
-
135-220HP Motor GraderNegotiableMOQ: 2 Pieces
-
GraderUS$ 60,000 - 80,000MOQ: 1 Set
-
Pengpu PD220 Bulldozer Parts ST21-27-2 Gear BlockUS$ 30 - 45MOQ: 1 Piece
-
Land ScraperUS$ 380 - 550MOQ: 2 Sets
-
Direct Manufacturer Motor Grader for SaleUS$ 4,300 - 4,800MOQ: 1 Set
-
The Small Motor Grader for Engineering is Easy to Operate and Directly Supplied From the Source FactoryUS$ 25563.38MOQ: 1 Unit
-
Hand-held Large Trowel Finishing and Drawing Machine Manufacturers Supply Buy Concrete Pavement Trowel Drawing Machine PriceNegotiableMOQ: 1 Pack
