Wholesale iron-on repair patches with iron on adhesive for fabric

Quick Details

Specification:

5 pieces of 70x70 mm iron-on repair patches

Patch Raw Material:

Fabric: Vinyl or TPU
Adhesive: Pressure Sensitive Adhesive

Modal Number:

Iron on repair patches

Application(s):

Repairs rips and tears in vinyl fabrics.

Regulations:

Adhesive passes ASTM F963-11, CPSIA, CPSA, REACH 17P, REACH 144 SVHC, CHCC, EN71 PART3:2013, RoHS, PAHs, and more!

Company Certificates:

ISO9001:2008 Quality Management System;
ISO14001:2004 Environmental Management System

Customization

- Custom patches of any size and color.
- Adjustable glue thickness, adhesion and cohesion.
- Custom packaging of blister pack, double blister pack, paper box, plastic container, bulk pack, etc.

Physical Properties

Patch Appearance:

Semi-transparent color

Glue Main Ingredient:

Polyacrylate

Odor:

Odorless

Properties:

- Made with industrial-strength adhesive. 
- Provides easy and quick repairs – simply peel and patch!
- Fast curing, watertight and durable.
- Repairs small slits or leaks in vinyl fabrics, such as tents, inflatable toys and other plastics.

Glue Adhesion and Cohesion:

Adjustable

Glue Thickness:

0.04~0.08mm, adjustable

Curing Time:

Ready to use in 20~30 minutes
Fully cure in 4 hours

Reactivity:

Stable under normal storage and handling conditions

Chemical Stability:

Stable under normal temperatures and pressures

Storage:

Store the product in a cool (32~120°F; 0~49ºC), dry and well-ventilated place. Keep container tightly closed. Keep away from food and drinks. Keep out of the reach of children. Do not allow material to be released to the environment without proper governmental permits.

Application Guidelines

Operating Temperature:

50~104°F (10~40ºC)

Method of Application:

Peel and patch

Instruction:

1. Use only in well-ventilated area. General indoor ventilation may be adequate.

2. Clean the surface to be repaired thoroughly and keep dry. It is recommended to wipe off the dust/ oil with 50% alcohol solution.

3. Peel off the backing paper and stick the patch to the surface, fully covering the leaks/seams/holes/slits. Press firmly to force out any air bubbles.

4. Place a piece of aluminum foil on the ironing board. This will be the working area.

5. Put the fabric and the patch on the ironing board, with the damaged area above the aluminum foil. Cover the patch with a pressing cloth. Pre-heat iron to cotton setting and set it to dry mode instead of steam mode.

6. Press the iron flat on the patch for about 10 to 20 seconds. Do not move iron back and forth. The heating melts adhesive so that adhesive sticks deeply to the fabric. 

7. Take away iron and allow the patch to cool down. Inspect the patch before re-inflating or re-use the repaired product to make sure it is securely attached to the fabric.