Water transfer printing diamond glitter reflective car wrap vinyl

Water transfer printing diamond glitter reflective car wrap

vinyl 

1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and

clean any contaminants that may cause imperfections.

2. Using a heat gun can aid in the installation by making the vinyl more pliable and also

help remove wrinkles.

3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles.

4. You could buy the best heat gun and car wrap squeegee in our company.

Kind Reminds

1. No pasting in rainy or cloudy weather.

2.  No waxing one week before the pasting of the car sticker.

3. No washing in 48hrs after the pasting. If there is crimp or crease or if the temperature is low,

better blow it with a hair drier first from a certain distance and then to paste.

What application method do we use on this film?

This film should be used with the dry application method after the surface  has

been cleaned and no oils, grease, wax, or other contaminants are on the surface.

Where do you ship from?

We have locations in Guangzhou, Guangdong. Depending on stock and location of buyer,

we determine the most efficient and cost effective way of sending you the product.

How long will this vinyl last?

 Most vinyl will not last 3 years outdoors, it may not even last one winter.

Our vinyl will last 3 to 4 years outdoors and up to 6 years indoors.

Is it hard to get bubbles out of the vinyl?

It is extremely easy, the air channels will allow you to push the bubbles with

relative ease as to not scratch or damage the surface like other vinyl.

I heard air channels are bad because the pattern on the adhesive shows

through the film...

These air channels are designed in a "natural"pattern not a square pattern.

So it does not show.

ALSO the adhesive compound will fuse when you apply heat and pressure. These films

will give you a seamless texture all around.