Contact Platform Support
Help CenterKingcera Parts and Components Made of Alumina Ceramic
Related Products
-
Ceramic SprayUS$ 5,000 - 10,000MOQ: 1 Ton -
Parts and Components Made of Alumina CeramicUS$ 100 - 200MOQ: 100 Pieces
-
100% High-temperature&wear Resistant Zirconai Ceramic RingUS$ 50 - 10,000,000MOQ: 50 Square Meters
-
100% High-temperature Zirconai Ceramic TubeUS$ 50 - 10,000,000MOQ: 50 Square Meters
-
Super Quality High Temperature&wear Resistant 95% Alumina Ceramic NozzleUS$ 10 - 200MOQ: 10 Pieces
Part and components made of alumina ceramic
Kingcera offer optimized wear protection for plant componets and pipe systems.
Why wear protection?--- reduce costs and avoid downtime.
Product structure:
Structure ceramic is a large group of new ceramic material of which the mechanical, heat and chemical properties are fully utilized. It can be used in a lot of rigorous working conditions, which makes it the key for the realization of many emerging technologies. Compared with metal material, the most outstanding advantage is its superior mechanical properties at high temperature, chemical resistance, resistane of oxidatioin at high temperature, wear resistance and low density (about 1/3 that of metal), therefore, it is gradually being used instead of expensive supper alloy steel in the cases that metal material cannot be competent, such as cylinder cover of engine, bush, paking ring and cut tools for ceramic.
Clear advantages:
--- long lifetime
--- maintenance free operation
--- no operation interuption
--- no production losses
--- no contaminaiton of conveyed mataterial due to abrasion, mixture or oxidation
--- physiologically harmless, suiable for food products
--- smooth surface to achieve good flowability and to aviod plugs
--- reduced pressure losses and lower energy cost
Major technical specicaitons for electronic ceramic (conform to the standard of GB/T5593)
| Item | Bulk density | Bending strength | Liquid penetration | Gas tightness | Break downstrength | Coefficient of linear thermal expansion | ||
| Test condiions | 20C-100C | 20C-50C | 20C-800C | |||||
| Unit and symbol | g/cm3 | MPA | X 10-6/C | X 10-6/C | X 10-6/C | |||
| Index | ≥ 3.6 | ≥ 280 | PASS | PASS | ≥ 1.8 | PASS | PASS | 6.5-7.5 |
| Item | Chemcal stability | Dielectric constant | Dielecric loss angular tangent valueGas tightness | Coefficient of linear thermal expansion | |||||
| Test condiions | 1.9 Hcl | 10% NaoH | 1MHz 20C | 10GHz 20C | 1MHz 20C | 10Hz 20 | 100C | 300C | 600C |
| Unit and symbol | mg/cm2 | mg/cm2 | X 10-4 | X 10-4 | Ω.cm | Ω.cm | Ω.cm | ||
| Index | ≤ 7 | ≤ 0.2 | 9-10 | 9-10 | 4 | 10 | 10-13 | 10-10 | 10-8 |
Services rendered for many branches of industry:
Coal fire power factory Iron and steel industry
Cement industry Chemical industry
Application examples:
Electrical wear detection Pneumatic wear detection
Mechanical wear detection
It service in such as lining, leader, chain wheel, mould, nozzle, valve, packing ring, piston, exletree and some components in paper production. We can produce it accroding to the drawings provided by clients.
Send Inquiry to This Supplier
You May Also Like
-
Medical Devices & Equipments , Dental Equipments CNC Milling Services With Aluminum AlloyNegotiableMOQ: 1 Kilogram
-
Aluminum Metal Stamping Parts Performance Punched Parts For Electricity EquipmentNegotiableMOQ: 1 Kilogram
-
Silver Industrial Aluminium Sliding Door Profiles Aluminum Extrusion FabricationNegotiableMOQ: 1 Kilogram
-
Ceramic BallUS$ 0.86 - 3.65MOQ: 100 Kilograms
-
Lock-nuts Splicing Bolt Connector With Torque Wrench for Connecting RebarsNegotiableMOQ: 1 Kilogram
-
Custom Made Electric Motor Magnet NdFeB Ring Magnet For MicroMotor / MRIUS$ 0.01 - 2MOQ: 1 Kilogram
-
Passive Door Switch , Elevator Component / Parts , PB143NegotiableMOQ: 1 Kilogram
-
Brass / Aluminum CNC Turning Parts Services For Led Lamp NF UNI JPI 0.006mm ToloranceNegotiableMOQ: 1 Kilogram
-
Sell CenospheresNegotiableMOQ: 1 Kilogram
-
Modern Style Ceramic Flower VaseUS$ 1 - 2MOQ: 1000 Pieces
