Superior quality Abrasion&wear resistant ceramic lining chemical hydraulic cyclone

Specifications

Lining hydraulic cyclone
1.Solid-liquid separation cyclone
2.Liquid-liquid separation cyclone
3.Connected with flanges

Ceramic lining chemical hydraulic cyclone

 

The ceramic lining cyclone is used for solid-liquid separation, liquid-liquid separation in mine, oil drilling, pharmaceutical, chemical.

 

The main character of our cylone is that we will use the high pure 15-35mm thick alumina ceramic tile lined into the steel cyclone to prevent the abraison and the impact ,so that it can prolong at least 6 times. 

 

Separation principle, centrifugal sedimentation caused by the steel cyclone high-speed rotation.

 

We can carry out non-standard design and production as required by the customer.

 

 

The technical specifications for ceramic 

 

The performences	Content of AL2O3	≥95%
	Density	≥3.8 g/cm3
	Rockwell hardness	≥85 HRA
	Rupturing toughness	≥4.8MPa.m1/2
	Compression-resistant strength	≥850MPa
	Bend-resistant	≥290MPa
	Thermal conductivity	20W/m.K
	Thermal expansion coefficient	7.2×10-6m/m.K

 

 

The technical specifications for cyclone

 

 

 

 

 

 

SERVICE :

 

Before sales: Guide customer to choose the most suitable type of equipments; provide advanced, energy-saving and practical flow chart as well as responsible for designing the site.

 

On sales: Inspect the product seriously before out of the factory; Invite customer for commissioning in the spot and raising the objection: Organize to delivery according to the contract.

 

After sales: Company can provide the instruction for guiding to install,debug and train the workers.