Car LED Knight Rider Lights

Advantage:

1.More than 150 modes of scanning,strenghthened effect of tail-dragging and lightening .the speed of the scan is adjustable

2.power cut-off memery (when the power is turned on after cutoff,the mode setting would be the same as before the power turn-off .);the modes will take turns in sequences automatially.

3.Lamp breaking kighterrant are all made of super bright LED,3 chips SMD .Power-thrifty and long product life

4.the cover is made of environment -friendly channel PVC.with 56cm in length and 1.4 cm in width .Heat-resistant ,water -proof.shock-proof and anti-corrosion

5.Handy installation.Standard socket connector,no damage to the car power system

Method of wiring :

1.the red and black wires to be connected to the positive and negative electrodes respectively (12V cars)

2.the yellow wires to be connected to the car braking circuit .under whatever mode the lamp will flash violently when braking,as a warning signal .(the yellow wire could be connected  to the door switch as well.the lamp wil flash violently when the door is open  )

3.Green wires to be connected to the cornering lamps.when the cornering lamps are on , related direction insrution will be showed

Wireless remote control:
1. Button A for power switch.
2. Button B for accelerating pattern-changing effort.
3. Button C for different pattern, you can choose some kinds circulatory Button
4. D for slowdown pattern-changing effort.