Contact Platform Support
Help CenterJining Direct Products Factory Alternating Current 1.5T Electric Forklift GN15S for Sale
Related Products
-
Jining Direct Products Factory 1.5 T Electric Forklift GN15D for SaleUS$ 1,000 - 8,000MOQ: 1 Set -
Reliable Direct Factory 2T Electric Forklift AC Motor Electric ForkliftUS$ 1,000 - 8,000MOQ: 1 Set
-
Reliable Direct Factory Alternating Current 1.8T Electric Forklift GN18S for SaleUS$ 1,000 - 8,000MOQ: 1 Set
-
Reliable Direct Factory 1.8T Small Electric Forklift GN18D for Sale Quality ChoiceUS$ 1,000 - 8,000MOQ: 1 Set
-
Reliable Direct Factory Alternating Current 3T Electric ForkliftUS$ 1,000 - 8,000MOQ: 1 Set
electric fork-lift GN15S intraduction
The electric forklift truck driven by electricity,Compared with diesel forklift,Has the advantages of no pollution, easy operation, energy efficient.The operator's work intensity is much lighter than internal-combustion forklift,The electric steering system,Speed control system,hydraulic control system,braking systems Are controlled by electrical signals,Greatly reduces the labor intensity of operators,So this supply big help to improve its efficiency and the accuracy of work .
electric fork-lift GN15S characteristic
• Reliable performance of the ac motor and ac pump motor, no carbon brush and free maintenance
• CAN bus technology, reduce the wiring, the reliability of communication signal transmission
• Regenerative recovery system, environmental protection and energy saving.
• Were placed horizontally drive motor, storage battery sink to the bottom frame, stability is good
• Use large capacity battery, work longer hours.
electric fork-lift GN15S technical parameters
Specification |
Model |
GN15s |
Unit |
||
Rated load |
1500 |
Kg |
|||
Load center |
500 |
mm |
|||
Type |
Battery |
|
|||
Size |
Lifting height |
3000 |
mm |
||
Mast tilt F/R |
6/12 |
deg |
|||
Dimension |
Total length |
3137 |
mm |
||
Total width |
1100 |
mm |
|||
Total height |
2090 |
mm |
|||
Min. turning radius |
1900 |
mm |
|||
Performance |
Max. travel speed (full load/idle load) |
12/13 |
Km/h |
||
Max. lifting speed (full load/idle load) |
280/430 |
mm/s |
|||
Max. Grade ability |
15 |
% |
|||
Machine weight |
3280 |
kg |
|||
Chassis |
Tyre |
Front wheel |
6.50-10NHS |
|
|
Rear wheel |
5.00-8-8PR |
|
|||
Axle base |
1380 |
mm |
|||
Battery |
Voltage/capacity |
48/440 |
V/Ah |
||
Electric motor and control |
Power of drive motor |
7.5(AC) |
Kw |
||
Power of pump motor |
6.3(DC) |
Kw |
|||
Control mode |
MOS tube |
Kw/rpm |
|||
FACTORY INTRODUCTION
XT INTRODUCE
WOLWA GROUP was established in 2005,which is a advanced technology equipment manufacturer.Its products include construction machinery,hydraylic component,mine equipment,pipe etc.We have 5 subsidiaries , include Wolwa construction machinery company,Dorson hydraulic component company,Guoneng structure part company,Wolwa pipe company,Jinsheng coal company.The capital of WOLWA GROUP exceeds RMB 2.5 billion.More than 800000 square meters international advanced workshop and more than 8000 square meters technology research center, produce more than 10000 complete machines and 20000 hydraulic components per year.Wolwa group has a provincial technology center and was the awarded of "Top 100 private enterprises in Shandong province",distinctive enterprise of Shandong ,National advanced technology enterprise,which is also a mainly supported enterprise by Jining government.
In the last 10 years,The aim of WOLWA GROUP is always "To be the leader of the construction industry,become a international famous brand" by keep on technological innovation.WOLWA brand series of wheeled excavator is applied to construction ,port , municipal works,park,environmental health,water conservancy,agriculture etc by it's intelligent ,efficient and multifunction features.WOLWA GROUP occupies the top level of market share of Chinese private enterprises.Dorson company -- the advanced hydraulic component company becomes a very important partner of many famous companies like Sanyi,Zoomlion ,Liugong,Xcmg,Beijing Hyundai,Sumitomo by the advantages of R&D.We got more than RMB 2.5 billion profit,taxes payment was more than RMB 3000 million.The main economic target were achieved double growth than 2013.
Based on the advantages of firm foundation and talents,technology,fund, WOLWA GROUP opened a new chapter of advanced equipment manufacturing.On Aug 2012,WOLWA GROUP undertook the National "12th five" project,The ice ice breaker which produced by WOLWA was tested in the Batou section of Yellow river successfully .We finished the batch production of icebreaker in 2014.WOLWA GROUP - Shandong university High-tech information industry park which was invested more than 3 billion CNY will complete recently.Many kinds of new technology equipment will be developed in the park,include amphibious ice breaker,Sea wave power generation,mobile water treatment truck etc.
After the park put on production,the expected amount of sales income will exceed RMB10 billion ,then WOLWA GROUP will become a international famous large high-tech equipment manufacturer in the world.
Send Inquiry to This Supplier
You May Also Like
-
Different Capacity Off-Road Forklift With Assistive DevicesNegotiableMOQ: 1 Set
-
CQD20EH-120 Braking Electromagnetic Electric Telescopic Traction Forklift Bearing 1.5T 2TNegotiableMOQ: 1
-
Electric Telescopic Forklift Truck Parts PriceUS$ 1,000 - 5,000MOQ: 1 Set
-
SHOUGONG SG500 500KG Mini ForkliftNegotiableMOQ: 1 Unit
-
HC Forklift Parts HPB10-C4HCUS$ 1 - 20,000MOQ: 1 Unit
-
High Quality China 22x9x16 Press On Solid Forklift Tires Traction Tires 22916US$ 10 - 100MOQ: 4 Units
-
Diesel Forklift (HC)US$ 10,000 - 50,000MOQ: 1 Unit
-
Tractor Front ForkliftNegotiableMOQ: 2 Units
-
2 Ton ForkliftUS$ 4,000 - 15,000MOQ: 1 Piece
-
Diesel Parts Oil Filter 52K2004 Liugong Forklift PartsUS$ 8.28 - 10.32MOQ: 1 Piece
