Copper Wire Drawing Dies

Specifications

Single crystal diamond dies

Natural Diamond dies

synthetic diamond dies

Manufacture scope: 0.02 - 2.6mm

Glomerocryst diamond dies

Manufacture scope:  0.05 - 25mm

Reduction Angle for Different Material, Size:

1. Structure of the dies:

The hole of the wire drawing dies is made up of four parts:

  (1) Lubricating area of the entry: There is an arc to make the wires enters to the workaround conveniently.

 (2) The workaround: The metals come about plastic deformation while drawing, the cross section of the metals is compressed and reduced.

 (3) Diameter fixed district: to guarantee the size and form accurate and even, lengthen the service life of the die.

 (4) Wire outlet area: wire outlet terminal can prevent scuffing and break-up when the machine is stopped.

2. Material source:

The die materials imported from U.S.A. GE Company. Each one has trade marks and certificate of competency. Granularities are 351025.

3. The production and delivery will takes 15 days

4. Usage time: the whole set of dies can guarantee drawing 30000 tons of copper wires. It can reduce the copper powder in the course of drawing. The surface of finished wires is smooth without any defect. After the dies drawing copper wires of 30000 tons, it will not be damaged, but it needs to safeguard, maintain, and polish.