Thermocouple wire and strip

Thermocouple wire and strip

thermocouple wire and thermocouple strip for use at temperatures up to 1260`C. STA thermocouple wire is supplied with brightor xoidezed surface according to standard or special EMF requirementsl.

Each indivial arm is calibrated against platinum and the EMF values are shown on each coil or spool

STA product program for thermocouples includes:

thermocouple wire-round and flat 

thermocouple strip

extension leads/extensio cables 

compensating cables

bunched wire 

thermocouple protection tubes

our program also include a bi-filar side-by side configuration in some  size ranges.

type of thermocouple wire

code             +opositive leg                -negative leg 

   N                Nicrosil (NP)                   Nilsl(NN)

   K                thermothal P (KP)         Thermothal N (KN)

   J                 Iron (JP)                           Cuprothal(JN)  

   T                 Copper                            cuprothal(TN)

The most used thermocouple combinations

Size range

Wire:STA thermocouple wire ranges from 0.05 to 8.0mm(0.0019 to 0.315inch ).thermocouple wire in the size range 0.0254mm to 0.51mm(0.01to 0.0201inchA)can be supplied with or without an insulating coating.

strip:standard size for the mocouple  strip range from  thickness 0.1to 3.0(0.0039 to 0.181inch )and width from 4 to 195mm(0.157 to 7.68 inch).

standrads

STA thermocouplealloys are supplied according to the following standards showing below. Where older standards are still in use (which are not equivalent to those listed below) , we can supply different EMF values upon request.