LTWF Building&Factory Use in Cooling System Air Cooled Industrial Chillers

Specifications

Cooling System Air Cooled Industrial Chillers
-Air Cooled Water Chiller
-Air to Water Chiller
-3-40Tons Cooling Capacity

LTWF Building&Factory Use in Cooling System Air Cooled Industrial Chillers

 

 

 

 

Applicable Industries

 

Industrial Reaction Kettle Cooling

 

Central Air Conditioning System

 

Chemical Industry.

 

Plastic Injection Cooling -Pharmaceutical Industry

 

Air Cooled Chiller Features:

1.With scroll, or reciprocating compressor of high quality, high efficient heat exchangers, excellent system design, by excellent process, the chillers is of suffient capacity and efficiency.

2.The chillers will work stably for long time period as they are produced by excllent process, composed of reliable control components and professional control procedure.

3. Units with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

4. 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.

5. External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.

6. Evaporator built with high efficiency tube in tube type heat exchanger, factory insulated with flexible close cell material.

7.Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.

8. Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve high & low pressure switch.

9. Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.

10. Electric panel consist of: compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit).

11. Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.

12. Complete safety protection:

a. High&low pressure protection, pressure safety value protection;

b. Overload protection to the compressor;

c. Power supply protect for phase lack, counter phase, voltage too high and voltage deficient;

d. Water system protection for freezing breaking, water lack etc.

 

System Diagram

 

Model Specifications: LTWF-68 A S  E(P)

LT-LVTE Company Products Code

W-Scroll Type Compressor     

F-Air Cooled Type Chiller

E-Built in Water Pump and Water Vessel; P-Built in Water Pump without Vessel; Empty-No Pump and Vessel

 

 Model Details of Air Cooled Chiller:

Two Kinds of Models: Air Cooled Water Chiller/Air to Water Chiller

1. Design Cooling Condition: Chilled Water In/Out 12°C/7°C;Ambient 35°C

Models: LT03AS-40AD Cooling Capacity: 8KW-120KW

-Hermetic Scroll Compressors

-Tube in Tube Type Heat Exchanger for Evaporator

-V Type Fin Air Cooled Condenser

-Water Pump and Water Tank are an optional to built in the chiller

-Chilled Water Inlet/Outlet Temperature 12°C/7°C,Ambient 35°C

-Mostly Used for Central Air Conditioning Cooling

  

Remark: 1.Colling Condition: Chilled water in/out 12/7°C;Ambient Temperature 35°C;

2. Suitable chilled water temperature: 7-25°C;

3. Power supply: 3P-380V-50HZ; with voltage allowance ±10%, voltage dif between the phase lines±2%;

4.The data above is for R22, contact us if that for R134a,R407c and other refrigerant need;

5. There may be Changes for improvement without notice, confirm always before your order.

  

2.Cooling Condition: Chilled Glycol in/out -1/-5°C; ambient 35°C

Models: LT03ASL-40ADL Cooling Capacity: 4.7KW-61.6KW

-Hermetic Scroll or Semi-hermetic Piston Compressors

-Tube in Tube Type Heat Exchanger for Evaporator

-V Type Fin Air Cooled Condenser

-Water Pump and Water Tank are an optional to built in the chiller

-Chilled Glycol Inlet/Outlet Temperature -1°C/-5°C, Ambient 35°C

-Mostly Used for Industrial Processing Cooling

 

 

Remark:1.Designed Condition:Chilled Glycol in/out -1/-5°C; ambient 35°C;

2.This series units used in low temperature conditions, 25% ethylene glycol to be used as a refrigerant;

3.Power supply: 3P-380V-50HZ;with voltage allowance ±10%,voltage dif between the phase lines±2%;

4.The data above is for R22, contact us if that for R134a,R407c and other refrigerant need;

5.There may be Changes for improvement without notice, confirm always before your order.

 Finished Products of Air Cooled Chiller:

 

Products  in Warehouses:

 

LUTE Heat pump central air conditioning system

A. LUTE brand---china famous brand

B. Adopt import advanced American technology

C. Using world famous accessories as compressor etc

D. Designed by ourselves, own tens of design patents

E. Most energy saving and lowest running charge

F. Adopting environmental protection refrigerant as R134A, R22, R407C etc

G. Advocacy the government Energy-saving and emission-reduction policy

H. Apply for kinds of buildings for cooling, heating and making hot water

I.Most Advanced Testing and Inspection System and We Promise that Each Unit will Be Tested Over 48hours to Be Proved Qualified

J. We Solemn Promise Quick After Service and Very Priced with Highest Quantity

  

1. National High-tech Enterprise, Abundant FinancialResources

     Registered capital USD5,000,000, and as a new energy industry, we got financial support from government of

     Shandong province. And we specializing in producing HVAC products (Heating, Ventilation and Air Conditioning) ,

     including central air conditioning system, Air Handling Unit, Water Source HEAT PUMP, Ground Source HEAT PUMP,

     and Refrigerant Equipments, including Air Cooled CHILLER, Water Cooled CHILLER,etc.

  

 

2. Two Production Bases, Guarantee Supply Ability.

      Covering an area of 110,000 CBM workshop, annual production of heat pumps are 30,000 UNITS, chillers are

      20,000 UNITS, andrefrigerant equipmentsare 50,000sets, fan coil 500,000 PCS. 

 

3. Strong R&D Research Team

      Built an Academician workstation, consisted of domestic famous professors and doctors, and high tech workman,

      which can design projects according to customer’s requirement., And built long term cooperation relationship with

      famous universities, such as Shandong university, Xi’an Jiaotong university, Qingdao ocean university. 

 4. Famous Brand Enjoyed High Reputation overseas

      We are one of ten leading brands, product exported to Russia, Kazakhstan,

      Ukraine, United States, Britain, Germany, Italy, and so on. And every year many overseas client come for a visit.

  

5. Perfect Quality Control System

     Invested USD1,700,000 to build the enthalpydifference laboratory, imported advanced inspection equipments from

     America, covering 100% testing item of AHRI, and with a perfect quality control system, from raw material purchase to

     production and quality inspection, to ensure the high quality product can reach the international standards.

6. Products Certificate: