Polypropylene Fiber Mesh Form for Concrete
Polypropylene Fiber Fibrillated Mesh Form
SUITABLE PROJECT:
A). Projects like concrete road, bridge, airport road and factory floor which strictly require cracking resistance. The life span of these projects will be lengthened for 5-10 years.
B). The walls of tunnels, mines, roofs and reservoir projects with special construction. When using spray technology in concrete construction, the PP fiber added into the concrete can effectively decrease the spray concrete's deformation rate of the walls less than 8% and that of the roof less than 12%, and also can reduce the friction. It can improve the constructing efficiency and working environment and popularize the spray technology.
C). River courses and dams, etc. The PP fiber can improve concrete's resistance to crack and squirt and wear to lengthen projects' life span.
D). Military defense works, dock banks and piers, etc. This fiber can greatly strengthen the concrete's spurt resistance and heighten these projects' safety and lengthen their life span
| Material | 100% Polypropylene |
| Density (g/cm3) | 0.91 |
| Elastic Modulas (MPa) | 3500min. |
| Width (mm) | 5 |
| Thickness (mm) | 0.035 |
| Length (mm) | 12, 18, 20, 38... |
| Equivalent Diameter (mm) | 0.1 |
| Shape | Beam like net |
| Crack Elongation (%) | 10min. |
| Tensile Strength (MPa) | 560 min. |
| Melting Point (°C) | 160-170 |
| Acid & Alkali resistance | Strong |
| Water Absorbency | No |
FUNCTION:
Increase seepage resistance
Prolong endurance
Improve steel protection
Increase cracking resistance
Increase fire resistance
Strengthen spurt & fatigue
Improve tensile, bending & folding strength
Improve plastic deformity
Strong acid & alkali resistance and good endurance
1. Length : Generally, the proper length of the fiber added into concrete is 20 mm, and in the spray concrete is 10mm.
2. Ratio Design: Usually the proper amount of fiber to concrete is 0.9kg/m3 , and the water-proof layer of the bridge requires 1.35-1.8kg/m3, and the spray concrete in the tunnel is also the same and other materials remain the same. The ratio of fiber and concrete can be determined by tests for special purposes. The fiber has better effects on the concrete with active compound materials, such as silicon ash, coal powder, ground slag and zeolite powder.
3. Mixer Adoption: Double-axle horizontal compelling mixer is better and self-dropping cylinder mixer can be used, too.
4. Mixing Process: Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as usual, but the stirring time should be properly prolonged to make fiber completely mixed.
5. Stirring Time: The purpose of the stirring is to make fiber fully spread into monofilament or the net fully spread, so generally the stirring time is 2-3minutes after the addition of polypropylene fiber-mesh.
Send Inquiry to This Supplier
You May Also Like
-
Selling CRACKAG(Non-explosive Demolition Agent)NegotiableMOQ: 2 Square Meters
-
High Grade Windows and DoorsNegotiableMOQ: 1 Square Meter
-
Chair Mat Clear Vinyl 36 X 48 Cleated For CarpetUS$ 1 - 20MOQ: 1500 Pieces
-
Low Density and High Porosity Light Weight Clay AggregateUS$ 60 - 160MOQ: 10 Kilograms
-
Landscaping Silt FenceUS$ 0.1 - 1MOQ: 1 Ton
-
Seepy Material New Kind of Concrete Pervious ConcreteUS$ 1,600 - 1,700MOQ: 1 Ton
-
Venta 500mm CUCHARAS MURO PANTALLA 500mm,9ton Para la Cimentacion Profunda Para LiebherrUS$ 20000 - 30000MOQ: 1 Piece
-
Cement Blanket 10mm Thick Weighing 12.5kg 2 Meters Wide and 50 Meters Long Concrete BlanketNegotiableMOQ: 1000 Square Meters
-
Erosion Control Mat , Rainscreen Mat , Composite Drainage MatUS$ 1.0 - 5.0MOQ: 1000 Square Meters
-
Waterproof Earthwork Geosynthetic Clay Liner Bentonite Swelling Waterproof Membrane Bentonite Geotextile Cover for LandfillsNegotiableMOQ: 1000 Square Meters