Contact Platform Support
Help CenterPP Monofilament Fiber
Related Products
-
pp Fiber Mesh for ConcreteNegotiableMOQ: 1000 Kilograms -
Polypropylene Fiber Monofilament FormUS$ 2.1 - 2.5MOQ: 1000 Kilograms
-
PP Fiber Monofilament Form 6mm, 12mm, 18mmUS$ 1.8 - 2.6MOQ: 1000 Kilograms
-
Polypropylene Fiber Mesh FormUS$ 2.1 - 2.5MOQ: 1000 Kilograms
-
Polypropylene Fiber Fibrillated MeshUS$ 2.1 - 2.5MOQ: 1000 Kilograms
Polypropylene Fiber Monofilament Form
1.Resist to shrink & crack
2.Increase seepage resistance
3.Increase friction resistance
4.Increase freezing & thawing resistance
5.Improve tendons protection
6.Replace steel net (using in plastering)
7. Prevent mortar split and crackle expansion
8.Increase impact resistance and peeling resistance
A). Be suitable for the water–proof layer, floor, inner &outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
D). Be suitable for any mortar projects and fine aggregate concrete projects.
- Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively
- Easy to be used: No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.
- It with fine economic property: The equivalent diameter of PP monofilament is only φ 0.03mm, so the ratio of diameter and surface area is high and on the basis of crack resistance, it can reduce the amount (to about 0.6kg/m 3 ).
- Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.
- It with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
| Raw Material | Polypropylene |
| Crack Elongation | 15-20% |
| Fiber Type | monofilament |
| Fiber Dia. | 0.03+/-0.005mm |
| Melting Point(℃) | 160—170 |
| Density(g/cm3) | 0.91 |
| Acid &Alkali Resistance | Strong |
| Tensile Strength (MPa) | 500Mpa min. |
| Length | 6mm/12mm/19mm etc.. |
A). Compound Amount. To resist the common cracks on surfaces, 0.6kg/m3 fibers to cement paint is enough, and for reinforced application 0.9-1kg/m3 is enough.
B). Stirring requirement. The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.
Packing: 0.6kgs or 0.9kgs per bag, 18kgs per carton.
Quantity: 400CTNS/20`FCL without pallet
900CTNS/40`HQ without pallet
Send Inquiry to This Supplier
You May Also Like
-
Selling CRACKAG(Non-explosive Demolition Agent)NegotiableMOQ: 2 Square Meters
-
High Grade Windows and DoorsNegotiableMOQ: 1 Square Meter
-
Chair Mat Clear Vinyl 36 X 48 Cleated For CarpetUS$ 1 - 20MOQ: 1500 Pieces
-
Low Density and High Porosity Light Weight Clay AggregateUS$ 60 - 160MOQ: 10 Kilograms
-
Landscaping Silt FenceUS$ 0.1 - 1MOQ: 1 Ton
-
Seepy Material New Kind of Concrete Pervious ConcreteUS$ 1,600 - 1,700MOQ: 1 Ton
-
Venta 500mm CUCHARAS MURO PANTALLA 500mm,9ton Para la Cimentacion Profunda Para LiebherrUS$ 20000 - 30000MOQ: 1 Piece
-
Cement Blanket 10mm Thick Weighing 12.5kg 2 Meters Wide and 50 Meters Long Concrete BlanketNegotiableMOQ: 1000 Square Meters
-
Erosion Control Mat , Rainscreen Mat , Composite Drainage MatUS$ 1.0 - 5.0MOQ: 1000 Square Meters
-
Waterproof Earthwork Geosynthetic Clay Liner Bentonite Swelling Waterproof Membrane Bentonite Geotextile Cover for LandfillsNegotiableMOQ: 1000 Square Meters
