dahua clear thinner/unthinner liquid rubber dip spray paint cans

Specifications:

1.Cheap alternative 

2.Wash resistant 
3.Sustainable 
4.Protection against dirt 
5.peelable after 2-3 years 

Multi purpose rubber coating spray Exhibits excellent moisture, acid. Alkaline & abrasion resistance Protects against electrical shock Skidding/slipping & corrosion For uses on wood, metal, glass, rope, plastic, rubber, concrete & tools.

Effectively bonds fabric to foam, metal, or wood surfaces, and to itself. Bonds urethane and latex-type foams to themselves in butt-splicing, knife edging, laminating, boxing, and edge turning operations as well as to metal, rigid plastic, and wood surfaces. Offers quick tack and high coverage, while providing a strong bond. It does not darken, nor does it leave a residual odor. Not recommended for bonding vinyl.

Installation Tips:

1.Clean and degrease your rims
2.Protect your valve with a cap or stick it with tape
3.Shake Spray 2 minutes before using
4.Spray evenly at 20-30 cm from the rim
5.After 15 minutes, the next layer can be sprayed, repeat 2-3 times for best results
6.After using the spray can upside down and keep clean aerosol valve blow to press and hold for 3 seconds.
7.It is advisable to do an assessment test

Product Features:

A multi-purpose, air dry, specialty rubber coating.

It can be easily applied by dipping, brushing, or spraying.

Protects coated items against moisture, acids, abrasion, and corrosion.

Provides a non-slip, comfortable, and controlled grip.

Remains flexible, stretchy, and will not crack or become brittle in extreme weather conditions.

Easy to remove from most surfaces when ready to return to the original surface

Easy to use and maintain.

Everlasting quality.

Can change the old color & protect at the same time emblems, rims, grills, mirror caps, racing stripes, window trims, center console and even whole cars.

Can be applied also as a clear protective layer to protect the original. paint from salt, snow and weather conditions all winter long.

Peel off the film simply and marvel at the intact original paint after the winter.

Cost-effective, easier and more quickly to wrap or paint.

Not carcinogenic and best effects for automobile.

Ideal for a broad array of do-it-yourself projects around the home, garage, garden, and elsewhere.

The applications are limitless in automobile segments, hobby, model, computer, construction, lights, electrical and tools.

Application Guide:

1. Surface must be smooth and cleaned.

2. For better grip and easy remove, apply 4-5 coats minimum. Allow 3-5 minutes in

between coats (Cooler temperature and humidity will prolong time in between coats).

3. Allow the finished product to dry for 24 hours. It will be dry to the touch within 30

minutes.

4. For the first two to three weeks, wipe clean with a damp cloth.

5. Do not use any household or automotive cleaners containing alcohol, solvent, or

ammonia to clean the car or part.

6. Start by removing the edges.

7. Once you lift up the edge, try to make a film, and take it off in big sheets.

8. If you feel that it is hard to remove you can use a hair dryer or heat gun to warm it up

and release the film from the surface (be patient).