2016 New Arrival ,Aliviz 20 xoptical zoom better night vision IR 180m 2Megapixel H.264 Outdoor hd PTZ ip security camera

Aliviz Thermal IP Camera special function and advantage. (Temperature measuring)

1. Adopts non-cooling IR focal plane sensor.

2. Detects 8~14μm LWIR.

3. Achieves the resolution of 420*315 pixels.

4. Provides a thermal sensitivity as high as 50 mK.

5. Supports special lens with 8mm / 15mm / 25mm / 35mm / 50mm focal distance (optional).

6. Supports Polarity /LUT switchover: black hot/white hot/rainbow/ironbow

7. Aliviz Thermal IPC Allows users to set measuring point or area and show and detect temperature: point measuring (with mouse), area measuring (highest temperature), and full-screen measuring (highest temperature) (functioning as a temperature measuring and prewarning product).

8. Provides overtemperature prewarning, overtemperature alarm, temperature change trend alarm, temperature difference alarm (functioning as a temperature measuring and prewarning product).

9. Supports DVE image enhancement function.

10. Supports digital noise reduction (DNR) and mirroring

11. Supports four encoding algorithms (H.264 BP/MP/HP/MJPEG; optional) and boasts high compatibility.

12. Adopts real-time three-stream output to meet the requirement of local storage and network transmission of videos.

13. Supports one-channel audio input, one-channel audio output, and two-way intercom.

14. Supports local storage using Micro SD (maximum capacity: 32 GB) to avoid video loss caused by network fault.

15. Supports NAS storage.

Any object with temperature higher than the absolute zero (-273.15°F) will emit infrared (IR) ray, even though it does not emit light. The IR ray is also called thermal radiation. IR rays emitted by objects with different temperatures can be absorbed by the detector to reflect temperature change and thus generate an electric effect. The electric signal is amplified and processed to produce a thermal image that corresponds to the thermal distribution of the object surface. This is the process of thermal imaging.

• Adapt to any environment

Traditional cameras rely on natural or environmental light to shoot images, but this Aliviz IR thermal imaging camera relies on the IR energy radiated by an object itself to form an image, not requiring any light. The IR thermal imaging camera is applicable to any environment and not affected by light strength. It can detect and identify any camouflage and concealed object both in daytime or nighttime, implementing round-the-clock monitoring.

• Monitor the temperature field with object energy distributed

The Aliviz IR thermal imaging camera can show the temperature field of an object, converting the invisible surface temperature distribution situation to a visible thermal image that reflects the surface temperature distribution situation of the object. By this monitoring, users can discover temperature anomaly in a timely manner and take precautionary measures to avoid any risk that may be caused by the anomaly, for example, a fire.

• Boast cloud penetration capability

Visible light and near IR ray will be absorbed by the air, cloud and smoke, but they are transparent to IR ray of the 3~5 μm Medium Wavelength Infrared (MWIR) region and 8~14 μm Long Wavelength Infrared (LWIR) region. Traditional cameras cannot shoot clear images under cloudy environment, but the Aliviz IR thermal imaging camera can penetrate the cloud and smoke to shoot clear images.

1. Uncooled IRFPA Microbolometer

2. Temperature detection

3. Resolution 420x315

4. Sensitivity 50mK

5. 25/35/50 mm lens optional

6. Vision Optical Zoom 22X

7. Infrared detection wavelength  8-14um

8. Color mode Black-Heat /White-Heat/Rainbow/Iron-Red

9. Support DVE image Enhance

Identify the hidden object behind tree

Hot water piper situation checking

Common IP Camera                                      Thermal IP Camera know all situation of hot-water piper

 

 

Identify the Fire Source

 

Common Camera know idea about the barrel     Thermal IPC could see the fire inside the barrel

 

Defog Function

 

Common IPC cannot see object under fog            Thermal IPC could see object through fog

 

Temperature Detection

 

Common IPC can’t see cigrate                          Thermal IPC could get the cigrate temperature 

 

Specification

CAMERA   AS-TM8822-JY
Detector Type		Long-Life,Uncooled   IRFPA Microbolometer
Array Format		420x315
Pixel Pitch		25 μm
Sensitivity		50mK
Spectral Range		8 to 14μm
Temperature Detection		Yes
Vision Lens		22X Optical Zoom
Thermal Lens		25mm,35mm,50mm   optional
Focus		Manually
FOV		23.7o×17.9o/17o×12.8o/11.9o×9o
Detect Distance(Vehicle)		1000/1500/2000 m
Detect Distance(Human   1.8m)		500/800/1100   m
Recognize   Distance(Vehicle)		600/850/1200 m
Recognize Distance(Human   1.8m)		300/450/650 m
Temperature Detect   Distance(Vehicle)		350/500/650 m
Temperature Detect   Distance(Human)		180/250/320   m
IMAGE
Video Compression	H.264 High/Main/Baseline   Profile, MJPEG
Bit Rate (CBR/VBR)	50kb-4000kb   ,500kb-12Mb
Audio Compression	G.711 ,RAW_PCM
Thermal Resolution	D1/30fps
Vision Resolution	1080P/30fps
Stream	D1 ,CIF ;1080P
Image Color Mode	Black-Heat /White-Heat/Rainbow/Iron-Red
DVE Image Enhance	Yes ,Level 0 -6
3D Noise Reduce	Yes
Image Correction	Auto/Manual/External
Image Overturn	Horizontal /Vertical /Horizontal+Vertical/
NETWORK
Network Protocols:	IPv4/v6,RTSP/RTP/RTCP,TCP/UDP,HTTP,DHCP,DNS,FTP,DDNS,PPPOE,SMTP,SIP
Alarm Trigger	Temperature Alarm,Motion   Detection,Network disconnect,Disk alarm,I/O alarm
RTSP Video	Standard   RFC2326, Support QuickTime / VLC Player.
Security	User security authentication, Reset, Hardware WatchDog
Web Language	English,   Chines
System Compatibility	Onvif
INTERFACE
Ethernet	1 Ethernet (10/100 Base-T)   RJ-45 Connector
Audio I/O	1ch Audio In,1ch Audio Out
Alarm I/O	1ch Alarm In,1ch   Alarm Out
RS485	Yes
BNC Output	Yes
Reset Button	Yes
Edge Storage	Micro SD/SDHC slot   ,Max 32GB
GENERAL
Power Supply	DC9-DC36V ,AC24V   optional
Power Consumption	50W(MAX)
Operating Temperature	-20℃~+55℃
Operating Humidity	0%   - 90% RH
Ingress Protection	IP66
Approvals	CE   / FCC
Product Dimensions	210x246x375mm
Product Weight	10kg
Product Packing	Cartons

 

 

 

As a customer who you need OEM service,the following is necessary:
1. Your LOGO of product must be registered. 
2. When you supply logo to us, which must be AI or CDR format and LOGO size must be marked for both product and packing box using.
3. For the LOGO color, customer must supply international color sample NO.
OEM and ODM service quantity requirements based on different product: