CO2 Laser Tube 150W For Fabric Cutting And Engraving

Puri Laser, Stronger Power

• brand: Puri CO2 laser tube  
• power: 60W/80W/100W/120W/150W  
• Certificate: FDA, CE, ISO QC system, ISA; etc. 
• application: engraving & cutting in advertisement and textile areas 
• sign material:  acrylic, glass, MDF, pvc, wood, ABS double color sheet, etc. 
• fabrics: leather, cloth, etc

Shanghai Puri 40W-300W small&medium power CO2 laser tube mainly used for laser engraving and cutting, applies to the vast majority of domestic the laser machinery manufacturing. Puri laser tube with middle & small is excellent in good laser spot mode, enough power, long life, etc.. 

Working Principle: high-pressure discharge stimulate high concentration CO2 to generate laser. 
Laser Wave Length: 10.6um. 
Laser Mode: low order mode.  

Water-Cooling: purified water, appropriate temperature 10-35°C. 

Working Environment: temperature 5-35°C, humidity 10-60%, clean environment, no serious pollution.

Working Current:25~30mA is appropriate (excessive current will affect laser power and laser tube lifetime. 
Safety Demand:CO2 laser tube outputs invisible light, positive with high pressure, if necessary, eyewear is essential.
Laser State: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can’t meet demand due to attenuation. )

1. There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube;
2. On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power. 

Model/Length(mm)