MD150 body Scanner Hand Held Metal Detector

Characteristics

1. With rechargeable battery and charger, earphone and Signal light
2. a Leathery cover outfits to the metal detector which makes metal detector be convenient to take.
3. There is a on-off which can switch the metal detector from sound alarm to light alarm, or from light alarm to sound alarm. It fits to work in different environments.
4. It needs 4-6 hours for charging. (the charger and rechargeable battery are ordered additional)
5. The alarm terms is sound and light alarm simultaneously, or vibration and light alarm simultaneously. You can choose the operate terms optionally.
6. When the low sensitivity on-off is pressed, the metal detector will only alarm when it finds big metal object (before you finish the low sensitivity detecting, don’t loose the on-off).
7. Auto off (power saving)

INTRODUCTION

It is a high performance Hand Held Metal Detector
Designed to meet the exact requirements of the security industry.
Typical uses will include body search for offensive weapons in crowd control, airport and border security, checking parcels and letters for metal objects and anywhere that hidden metal needs to be detected.

OPERATION
1. It operates on one 9V standard or rechargeable battery. To install the battery, slide off the battery cover and place the battery into its compartment while matching the +/- symbols.
2.Turn the unit on by pushing the on/off switch until it clicks on and the greed LED is lit. The detector is now operational although an increase in sensitivity and depth range can be achieved by turning the sensitivity adjuster anti-clockwise until the red LED is lit and a constant audio tune is heard. Turn the sensitivity adjuster clockwise until the red LED just goes out and the tone fades (green LED on).
The detector is now tuned for optimum sensitivity and depth range.
3.Holding the unit with the detection face towards the surface, sweep backwards and forwards continuously at a height of 10-30mm above the area to be scanned.
4.The presence of metal will be indicated by the audio warning tone and the red light coming on. If the detector is held still over a metal object the detection signal will automatically reduce, therefore it is important that the unit is continually scanning the surface when in use.

PERFORMANCE
The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected.
Typical performance figures are given below:

Maximum Detection Range 

LOW SENSITIVITY OPERATION
Press the low sensitivity switch during detection, scanner will then only respond to bigger metal objects such as a hand gun, knife, etc and will not respond to small metals such as a coin, key, hatpin, etc. Do not release the low sensitivity switch until you complete low sensitivity detection.

RECHARGEABLE BATTERY SOCKET
1.You may use a 9V rechargeable battery to power the detector.
2.It takes four to six hours to fully charge the battery. The battery charger socket is located at the side of the detector .
Note: Turn off the detector when charging it.

EARPHONE
Can connect earphone to use in the noisy environment
SIGNAL LED LIGHT
The more LED shine means the metal bigger

VIBRATOR BUTTON
The detector is equipped with a vibrator button also located at the side of the detector. Vibration function should be used in noisy work situations or in places where the operator does not wish for the audio tune to be heard in his surrounding area. Press this button, vibrator works; release it, audio tune works.

NOTE
1.If the green light goes out completely or fails to come on or if the unit is making unfamiliar audio tunes, the unit is unstable and should not be used until the battery is recharged or replaced.
2.If the unit is not to be used for a certain length of time it is advisable to remove the battery to avoid battery leakage with could cause serious damage to the detector

3.When not in use, the detector should be stored in a dry warm environment.