L/B corner bead &plaster stopping angle

 

The plaster stopping angles have a perforated,recessed edge and are used where the edge of the building board is not exposed and where the fitting of a stopping bead would be difficult.The stopping angle is fixed to the sheet of building board with an adhesive or staples,with the finishing coats bonding into the building board and feathering up to the bead nib.ldeal for use around door jambs,however,in this application it is recommended that when using building board up to 10mm thick,a P26 should be used so that the leg will slot into the door jamb.similarly,when using 13mm board,P27 should be used.SIZE:P25 10mm leg; P26 13mm.

 

L/B corner bead &plaster stopping angle

Standard in Australia,

Angle accord with fast installation,

Galvanized 50-275g,

Size30*6,

       30*10,

       30*13

       30*16

Thickness:0.3-0.5mm

 

 

PART NO	DESCRIPTION	Size(mm)	Length(mm)
	Leg Stopping Angle 6mm	30*6*0.4	3000
P25- L shape	Leg Stopping Angle 10mm	30*10*0.4	3000
P26- L shape	Leg Stopping Angle 13mm	30*13*0.4	3000
P27- L shape	Leg Stopping Angle 16mm	30*16*0.4	3000
P01- L shape	External Angle 90	30*30*0.4	2400/2700/3000/3600
P50- Z shape	Shadowline stopping angle	10*10*30*0.4	3000

packaging:paper box,50-100pcs/box