sell 3.3m diameter and 48m length rotary kiln

Specifications

with the use of new technologies, it is direct in vision, convienent in operation and reliable in use.

 

φ3.3×48m Rotary kiln

    Technical parameters and performance

    1Specificationφ3.3×48m

    2Productive capacity1200t/d

    3Shell inclination4%

    4Shell rotation speed0.36-3.57r/min

    5Support Nos.:  3

    6Sealing typegraphite block labyrinth seal for kiln head

                    Cylinder press-tightly end face seal for kiln rear

7Kiln head cooling typeair cooling

8Transmission waysingle drive

9Thrust roller type: hydraulic thrust roller(oil pump stationYY-I type)

10Cooling water for each supporting roller device:2.5m³/h

    11Main motor:

ModelZSN₄-280-091B  power:160kW  rated rotating speed:1500r/min  rated voltage:440V  protection gradeIP44  Excitation voltage:180V  adjustment range:150-1500r/min

    12Speed measuring generator

    ModelZYS-3A  speed adjustment scope0-2000r/min  power22W  rated voltage:110V

    13Main gear box

        ModelZSY450-40 center distance: 989mm  transmission ratio:40

    14Auxiliary drive motor

        ModelY160M-4B₃  power:11kW  rated rotating speed1460r/min  rated voltage:380V

    15Auxiliary drive reducer

        ModelZSY355-31.5  center distance:355mm  transmission ratio:31.5

      Scope of supply and material

      Main machine

    Rotary parts

    1Shell  material Q235-B    1piece

    2Tyre  material ZG310-570 HB>180   3 pcs

    3Girth ring  material ZG310-570 HB=200   1piece

   Kiln head sealing devicegraphite block labyrinth seal  1set

Kiln rear sealing deviceCylinder press-tightly end face seal1set

    Supporting device3

    1Supporting roller device2 groups

      Supporting roller ZG340-640  HB>190  2pcs×2

      Supporting roller shaft 45#  HRC45-48  2 pcs×2

     Bearing bracket for supporting roller  combination parts  2 pcs×2

   2Thrust roller device1 group

      Supporting roller ZG340-640  HB>190  2pcs

      Supporting roller shaft 45#  HRC45-48  2 pcs

      Thrust roller  ZG340-640  HB>190  1 piece

     Bearing bracket for thrust roller  combination part  1 piece

      Thrust roller oil pump station and control cabinet YY-I model  each one unit

    Pinion section

    1Pinion  35SiMn  HB>207-269  1 piece

    2Pinion shaft  35CrMo  HB>217-265  1 piece

    3Pinion bearing bracket  combination part  1set

    Drive unit

    1Main motor  ZSN4-280-091B  one unit

    2Main gear box ZSY450-40  one unit

    3Auxiliary motor  Y60M-4B  one unit

    4Auxiliary reducer ZSY355-31.5   one unit

    5Coupling   combination    one set

    6Drive unit base plate  combination part  one piece

    7Speed measuring generator  ZYS-3A   one unit

    Girth gear housing   combination part   one piece

    Kiln head cooling pipe   one piece

Technical documents
1 General assembly diagram	1 copy
2 Manual	1 copy
3 Quality certificate	1 copy
4 Packing list	1 copy