PSH two layers car puzzle parking system/underground garage lift

Specifications

underground garage lift:
1.Arrangement is convenient.
2.Multiple protection device.
3.Concise and practical.

 

PSH two layers car puzzle parking system/underground garage lift

 

 

1.Advantage and Application

(1)This type of parking equipment has a lot of combinations much adaptable for different sites and with low civil requirements.

(2)You can combine freely according to different space and terrain.

(3)Its maintenance is simple and low-cost.

(4)You can fix it in the open air, basement, on the ground, and underground.

 

2.Equipment Formation

Each controlling group of this parking system can be designed from 3-car to 10-car and can also be arranged into tandem columns. The best option is within 17 cars per group, and its up to the specific site conditions.

 

3.Working Principle

The equipment uses chain or wire to lift and utilizing big span design in front or back side, each parking space with a car board, which through lifting up and down and sliding to the ground, the driver goes into the garage, parks or takes a car, finishes the whole procedure.

 

4.Equipment Type

4-point safety device on the ground and underground; independent car-resistant device, over-length, over-range and over-time detection secure the safety of cars.

 

5.Technical Parameters

No.	Name		Instruction
1	Layer		Upper layer	Ground layer
2	Vehicle Size	Length	5000(mm)	5000(mm)
		Width	1850(mm)	1900(mm)
		Height	1550(mm)	1550(mm)
3	Vehicle Weight		1700(kg)	2000(kg)
4	Lifting	Power	2.2(kw)
		Speed	4(m/min)
5	Sliding	Power	0.2(kw)
		Speed	8(m/min)
6	Driven Mode		Motor+Chain
7	Operation Mode		Button, Automatic, Manual
8	Power Supply		AC380V/220V50Hz; 3¢380V/220V50Hz