7.4v 1300mAh Li-Poly, Lipo Battery Pack w/ PCB and Bare Leads

Specifications

7.4V 1300mAh Polymer Li-Ion Polymer battery pack Nominal Voltage: 7.4V Capacity: 1300mAh Max. Discharging rate: 7Amp with PCB

Features and Benefits

• One protective circuit board PCB installed with the battery pack that limits the discharging current of  battery pack to 3Amp. But protect battery from: 
  - Over-charging cut-off: 8.4V 
  - Over-discharging cut-off: 4.6V 
  - Over-drain >6.5Amp 
  - Short circuit  and Wrong polarity   
• Light-weighted : 1.6 oz.
• Dimension: 66mm x 39mm x 12mm
• 4" (12mm) long prewired and shrink wrapped, 26AWG Wires
• Recommended charger: Universal Li-ion / Li-polymer Smart Charger to charge this battery pack.
• If you connect two of these modules in parallel, you can build a 7.4V 1.75 Ah Battery pack with a 1.7 Amp discharge rate.
• Applications: 
  - HID Bikelight or Dive light 
  - Autonomous submarine 
  - RC Car and RC airplane with greater energy needs 
  - Building external battery packs for Laptop computers or 12V portable devices