JGP three-hole Aluminum alloy series cable clamp

Specifications

The clamp is fixed on the cable support bracket or bridge with aaUaa type bolt (hole no needed before installed to the bridge

 

The clamp is made of high-strength anti-corrosion and anti-magnetic aluminum alloy with rubber pad to fix the cable triangularly to reduce the induction voltage of the metal sheath. The clamp is fixed on the cable support bracket or bridge with ‘U’ type bolt (hole no needed before installed to the bridge or bracket). Bolts can be made of stainless or hot galvanized according to the customers’ requirement. There are three colors, yellow, green and red. Make it clear before you placing the order.

 

Made by high strength anticorrosive Al alloy and used for fixing position of three phase cable. It adopts bolt to fasten, wrap up by rubber blanket, no hurt to cable. The hole of bolt is oval, so it can adjust the hole distance within a certain range.

 

Installation instruction
1.first fix the under body of clamp at the bracket
2.wrap up the cable with rubber blanket, put it on the under body of clamp
3.Fix the upper and under body of clamp with bolt