Home > Lights & Lighting > LED Encapsulation Series > LED Module > SMD5050 RGB Color LED Modules

SMD5050 RGB Color LED Modules

SMD5050 RGB Color LED Modules photo-1
US$ 0.5 - 1 MOQ: 1000 Pieces
Key Specifications
Get Latest Price
Model Number:
BG-0207-4-5050-IC
Chip Material:
GaP
Emitting Color:
Tri-Color(Red-Blue-Green)
Payment & Shipping
Payment Methods:
Port of Shipment:
Shenzhen
Delivery Detail:
Delivery time depends on order quantity.
Model Number BG-0207-4-5050-IC
Chip Material GaP
Emitting Color Tri-Color(Red-Blue-Green)
Luminous Flux(lm) 61-68 Lm
Optical Attenuation(%) 1%
Power Other, 1.4W, 1.4W
Power Dissipation 0.2W
Color Rendering Index(Ra) 80
Color Temperature Warm White
Operating Temperature(℃) -20, +40
Storage Temperature(℃) -20, +40
Place of Origin Guangdong, China
Brand Name Bright
Certification CE

Specifications

SingleColor LED Module
1.Voltage:DC12V
2.4pcs SMD5050 led
3.Power:1.4W
4.2years warranty

SMD5050 DMX RGB LED Modules

 

 

FEATURES:

 

 

 

LED QTY.:4* SMD5050 led/pcs

 

LED Color:RGB,Single color

 

Voltage:DC12V

 

Max Power:1.4W/pc

 

Beam angle:120°

 

Waterproof:IP65

 

Stucture:sing Silica gel wire.Injection Tooling with high productivity, The plastic housing with perfect Anti-aging ability

 

color changing modes like waterflow, chasing, gradually changing, flashing, diffusing and other kinds of colorful performance

 

Application: advertising signs, indoor decration and other kinds of edge lighting

 

Controlled by offline controller with SD card or DMX console

 

 

Application

 

Widely used in Advertising board,letters,lightbox,Marks,Direction, 

Indoor Decoration,Cabinet light,Out wall decoration,and Lighting Project….etc

 

 

 

 

 

 

Dimension:

 

 

 

SMD5050 RGB Color LED Modules

DMX module

1when the white line located in the below postion , it will be input terminal (with DMX controller)

2,white line connects with power supply,DC12V,blue line for anode,green line for ground(GND),red line for signal input(DATA),

3,Each 40 pcs module match one power supply( 60W );Negative and positive electrodes must be correct.

 

 

RGB module

 

1,when the white line located in the below postion , it will be input terminal (without IC RGB controller )

 

2,white line connects with anode of power supply DC12V,Red line,Green line,and Blue lines will connect with signal input.

 

3,Each 40pcs module match one power supply (60 W) Negative and positive electrodes must be correct.

 

Single color modules

                            

1,It’s easy to connect,white lines will connect with anode of power supply DC12V,black lines connect with ground(GND),

2,Each 40pcs module match one power supply (42 W);Negative and positive electrodes must be correct.

 

Attention:

 

1,Drive voltage of module is DC12V,pls attention your connect lines for anode and negative electrode;

2,The lines between power supply and module should above 1.5 square to sure 

the available bearing under the high current 

 

Parts List:

1,Specification;

2,M3X12MM screw, 2PCS

 

Notes:   

1,Please always use the light out of its package. 

2,Before starting use of the light, please check if the light was damaged during transportation. If any damage shown, please DO not install or use it.

3,Any maintenance should be performed by trained professionals only.

4,Keep packaging material away from the reach of children and pets.Risk of suffocation!

5,Caution. The packaging contains small parts that may be swallowed by children.

6,Never leave children unattended in the vicinity of the lights and do not allow them to play with electrical devices.

7,Try to avoid looking directly in the LED beam-especially for extended periods of time. Do notshine the LED light in another person's eyes.

8,Never cover the lights by other objects.

9,Never allow the light to come into contact with open flames or external heat sources.

10,The products need to re-repair inspection or special treatment of retirement after service time

 

Maintenance :

1) Please turn off the power before cleaning.

2) It is not allowed to clean lamp by the chemicals or any canker goods.

3) After cleaing lamp,it can be used continuously when it is completely dry 

 

Notes:

     Non-professionals are not allowed to disassemble and maintain the products.We have the right not to provide after-slae service if unauthorized disassembly and maintenance happens to the products.

 

SMD5050 RGB Color LED Modules

 
SMD5050 RGB Color LED Modules
 
SMD5050 RGB Color LED Modules 
SMD5050 RGB Color LED Modules
 
SMD5050 RGB Color LED Modules

Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer
Year Established
2011
Factory Size
3,000-5,000 square meters
Total Employees
501 - 1000 People

Recommended Categories

Explore top categories and find suppliers for your specific needs