Contact Platform Support
Help CenterThree-target Solar Collector Tubes
Related Products
-
Three Target Solar Energy Tube for Solar Water HeaterUS$ 2.5 - 4MOQ: 500 Pieces -
Three Target Purple 47mm 58mm Vacuum TubeUS$ 2.5 - 4MOQ: 500 Pieces
-
Triple Coated Solar Water Heater TubeNegotiableMOQ: 500 Pieces
-
Guangpu Solar Energy TubeUS$ 2.5 - 4MOQ: 500 Pieces
-
Solar Collector TubeUS$ 2 - 3.5MOQ: 10000 Pieces
Advantages:
1.high pressure withstanding ability
2.high absorption efficiency
3.low heat loss
4.stable and ageing-resistant coating
5.anti-freezing
6.workability in tough weather
7.10 years’ warranty
8.ISO9001:2008 certified
This kind of tube is made of two layers of borosilicate glass which is specially hard. Borosilicate glass 3.3 is an ideal material for solar evacuated glass tube because it has high transparency and can withstand high temperature as well as high pressure.
The absorber layer is coated with stainless steel, aluminum and copper in an environment of entire nitrogen. The selective coating is more stable when stainless steel is added, and the absorptance is higher. Since copper is more effective than aluminum in reducing radioactive heat loss, so heat loss is greatly cut down when copper is coated as the infrared-reflection layer.
The vacuum jacket which is of high vacuum degree is a kind of superior insulation. It reduces heat loss and protects the water in the tube from freezing.
Solar evacuated glass tube can produce hot water even in tough weather. That’s why it is suitable to be used in areas and regions where is very cold or always cloudy.
Technical Specification
1.Structure: Two concentric borosilicate glass
2.Material: Borosilicate glass 3.3
3.Glass thickness: 1.6mm
4.Thermal expansion: 3.3 × 10-6°C
5.Outer/Inner tube diameter: 47mm/37mm
58mm/47mm
6.Outer tube diameter×Length: 47mm×1500m/1600mm/1800mm
58mm×1500mm/1600mm/1800mm/2000mm/2100mm
7.Selective coating: SS-AlN/Cu
8.Absorptance: 0.90-0.95(AM1.5)
9.Emittance: 0.04~0.06(80°C+-5°C)
10.Vacuum degree: P≤5.0×10-3 (Pa)
11.Stagnation temperature: 260~300°C
12.Heat loss: ULT= 0.4~0.6w/(m2.°C)
13.Resistance: Hail diameter≤ 25mm
14.Solar irradiation for obtaining a preset water temperature rise in an all-glass evacuated solar collector tube under stagnation: H=3.7~4.2 MJ/m2(58mm); H=2.9~3.2MJ/m2(47mm)
Specification | |
Structure |
Two concentric borosilicate glass |
Material |
Borosilicate glass 3.3 |
Thermal expansion |
(3.3+-0.1)×10-6 |
Outer tube diameter |
Φ47±0.7mm &=1.6mm |
Φ58±0.7mm &=1.6mm | |
Inner tube diameter |
Φ37±0.7mm &=1.6mm |
Φ47±0.7mm &=1.6mm | |
Length |
47-1500mm/1600mm/1800mm |
58-1500mm/1600mm/1800mm/2000mm/2100mm | |
Coating |
SS-AlNx/Cu |
Solar absorption efficiency |
0.90-0.95(AM1.5) |
Launch ratio |
0.04~0.06(80°C±5°C) |
Vacuum degree |
P≤3.0×10-3 (Pa) |
Max stagnation temperature |
260~300°C |
Average heat loss coefficient |
ULT= 0.4~0.6w/(m2.°C) |
Resistance performance |
Hail diameter≤ 25mm |
Solar irradiation for obtaining a preset water temperature rise in an all-glass evacuated solar collector tube under stagnation |
H=3.7~4.2 MJ/m2(58mm) |
H=2.9~3.2MJ/m2(47mm) | |
Send Inquiry to This Supplier
You May Also Like
-
Vacuum Solar Collector China, Heat Pipe Solar Collector, Vacuum Solar CollectorUS$ 180 - 390MOQ: 1 Set
-
Nickel Plating Round Heat PipeNegotiableMOQ: 500 Pieces
-
Solar Header CollectorUS$ 190MOQ: 1 Combo
-
High Efficiency Full Black Solar Cells Panel Factory Prices For Sale PV Module 400W Solar PanelsNegotiableMOQ: 2 Pieces
-
500W High Power Monocrystalline 72 Solar Cells Solar Module Photovoltaic PanelNegotiableMOQ: 2 Pieces
-
Haining Baoguang Solar Vacuum Tube for Solar Water HeaterUS$ 1.75 - 1.77MOQ: 100 Pieces
-
Solar Energy System Integrated Solar CollectorUS$ 90 - 200MOQ: 1 Set
-
High Heat Resistant Double Vacuum Borosilicate TubeUS$ 15 - 30MOQ: 1000 Units
-
2015 Compact Solar Water Heater System With SRCC Solar Keymark Solar Water Heater WholesalesUS$ 564.00 - 564.00MOQ: 1 Set
-
FLAT PLATE SOLAR COLLECTOR 1000X2000US$ 180 - 200MOQ: 100 Pieces
