Contact Platform Support
Help CenterS45C / C45 Density of Carbon Steel
Related Products
Specifications
c45 density of carbon steel1.UT passed:SEP 1921-84 class C/c
2.Hardness:<230HB
3.Hot rolled or forged
c45 density of carbon steel
1. Main application
(1) this steel is widely used in machinery manufacturing.
(2) For the manufacture of high strength requirements parts, such as gears, shafts, piston pin and the uneven force big machining parts, forgings, stampings and bolts, nuts, pipe joint.
2. Specification:
Round bar |
Diameter(mm) |
Length (mm) |
|
50~500 |
2000~5800 |
|
|
plate/sheet |
Thickness(mm) |
Width (mm) |
Length (mm) |
20~600 |
600~2300 |
2000~5800 |
3. Delivery condition:
Acc. to your request—Standard steel bar(sawing)
——non-standard steel bar(sawing)
or Mill deliver condition,without sawing or cutting
Conventional or ESR, hot rolled or forged, black surface or milling
Hardness: annealed to HB≤215
4. Features:
(1) Higher strength in a high-quality carbon steel.
(2) Mechanical properties of this steel is very good.
(3) the hardeness of this steel could be 42~46HRC by quenching.
(4) due to poor hardenability, general normalized state, high mechanical performance requirements, the use of quenched and tempered.
(5) Moderate in cold plastic deformation, the machinability by annealing and normalizing is better than quenched and tempered.
5. Chemical analysis
C |
Si |
Mn |
P≤ |
S≤ |
Cr |
0.50~0.60 |
0.20~0.30 |
0.70~0.90 |
0.030 |
0.030 |
0.01~0.03 |
6. Compared grades(based on usage)
Chinese |
American |
German |
Swedish |
Japanese |
GB |
AISI |
DIN |
ASSAB |
JIS |
45 |
1045 |
C45 |
|
S45C |
7. Heat treatment (for reference)
quenching |
tempering |
tensile strength |
yield strength |
elongation |
820~870 °c |
550~650 °c |
≥600MPa |
≥355MPa |
≥16% |
8. Our advantage
(1) lower price: less producing cost for the small steel factory, so we could supply lower price to our customers.
(2) large stocks: we are the leading steel agency in our country, so we have large stocks for many steel grade and sizes.
(3) quality assurance: 100% according the steel grade standards, MTC available before the shipment.
S50C photos for your reference:
(1)Four sizes cutting
(2)Original plate no cutting size
We also have S45C round bars,photo for your checking below:
(1)Hot rolled bar
(2)Forged bar
Our factory informations:
Contact ways:
Send Inquiry to This Supplier
You May Also Like
-
Steel Sheet & Plate & Sheet Pile In Stock，Q235B、Q355B、S235JR、S355GP、S355NL、A328、A572、A690NegotiableMOQ: 5 Long Tons
-
Hairline Stainless Steel Sheet 316 316L 316ti 317 317L 321 Stainless Steel PlateUS$ 900 - 3000MOQ: 1 Ton
-
Factory Direct Supply Hot Dipped & Electro Galvanized Steel Pipe, Galvanized Round Tube 30×1.5mm / 30×2mm, 6 Meter Fixed LengthUS$ 510 - 535MOQ: 10 Tons
-
High Quality Custom Mold Parts Guide Strip Wear Block Wear Plates BOLIUS$ 9.5 - 10MOQ: 1 Piece
-
ASTM A36, Ss400, S235, S355, St37, St52, Q235B, Q345b Carbon Steel Sheet PlateNegotiableMOQ: 1 Ton
-
Cut to Length Alloy 36 Steel Plate UNS K93603 Invar 36 Corrosion ResistingNegotiableMOQ: 10 Kilograms
-
Steel High Quality 304 316 420 Stainless Steel Plate Stainless for Building MaterialsNegotiableMOQ: 100000 Tons
-
Chromium Carbide Overlay Wear Plate WD-1900 Smooth Surface CCO Wear PlateNegotiableMOQ: 1 Square Meter
-
0.2mm-1.0mm Electromagnetic Pure Iron Sheet With Low Iron Loss for Motor LaminationsNegotiableMOQ: 500 Kilograms
-
Cold Rolled Electrolytic Tinplate Sheet With 2.8g/m² Tin CoatingUS$ 820 - 830MOQ: 25 Tons
