Home > Products > Carbon steel plate/ flat bar/round bar > S50C/C50/1050 moulding flat steel rolled
S50C/C50/1050 moulding flat steel rolled
- 5000 Ton / Tons per Month
- shenzhen
- T/T
Product Details
Standard: | AISI, ASTM, DIN, GB, JIS | Grade: | S45C | Thickness: | 8~600mm |
Place of Origin: | Guangdong, China | Brand Name: | Circle Four | Model Number: | S45C |
Type: | Steel Plate | Technique: | Hot Rolled | Surface Treatment: | Coated |
Application: | Container Plate | Special Use: | High-strength Steel Plate | Width: | 600~2300 |
Length: | 3000~5800 |
Product Description
flat steel rolled
1. Main application
(1) this steel is widely used in machinery manufacturing.
(2) For the manufacture of high strength requirements parts, such as gears, shafts, piston pin and the uneven force big machining parts, forgings, stampings and bolts, nuts, pipe joint.
2. Specification:
Round bar | Diameter(mm) | Length (mm) |
|
50~500 | 2000~5800 |
| |
plate/sheet | Thickness(mm) | Width (mm) | Length (mm) |
20~600 | 600~2300 | 2000~5800 |
3. Delivery condition:
Acc. to your request—Standard steel bar(sawing)
——non-standard steel bar(sawing)
or Mill deliver condition,without sawing or cutting
Conventional or ESR, hot rolled or forged, black surface or milling
Hardness: annealed to HB≤215
4. Features:
(1) Higher strength in a high-quality carbon steel.
(2) Mechanical properties of this steel is very good.
(3) the hardeness of this steel could be 42~46HRC by quenching.
(4) due to poor hardenability, general normalized state, high mechanical performance requirements, the use of quenched and tempered.
(5) Moderate in cold plastic deformation, the machinability by annealing and normalizing is better than quenched and tempered.
5. Chemical analysis
C | Si | Mn | P≤ | S≤ | Cr |
0.50~0.60 | 0.20~0.30 | 0.70~0.90 | 0.030 | 0.030 | 0.01~0.03 |
6. Compared grades(based on usage)
Chinese | American | German | Swedish | Japanese |
GB | AISI | DIN | ASSAB | JIS |
45 | 1045 | C45 |
| S45C |
7. Heat treatment (for reference)
quenching | tempering | tensile strength | yield strength | elongation |
820~870 °c | 550~650 °c | ≥600MPa | ≥355MPa | ≥16% |
8. Our advantage
(1) lower price: less producing cost for the small steel factory, so we could supply lower price to our customers.
(2) large stocks: we are the leading steel agency in our country, so we have large stocks for many steel grade and sizes.
(3) quality assurance: 100% according the steel grade standards, MTC available before the shipment.
S50C photos for your reference:
(1)Four sizes cutting
(2)Original plate no cutting size
We also have S45C round bars,photo for your checking below:
(1)Hot rolled bar
(2)Forged bar
Our factory informations:
Skype:tongtongyaya
Contact Us
- Dongguan Circle Four Metal Materials Co., Ltd.
- Contact nameJOEY ZHANG
- Phone086-0769-85313622
- Addresschangan Dongguan,Guangdong
- ASTM A283 A387 Hot Rolled Alloy Steel Plate
- S235 S275 S355 Mild Steel Plate
- A514 A517 A516 Q245R Q345R Container Carbon Steel Plate
- ASME SA514 Gr.q SA517 Gr.q High Strength Alloy Steel Plate
- Low Temperature Container 09mnnidr SA203 SA204 SA302 Steel Plate
- S460 S500 S690 S890 S960 Hot Rolled High Strength Structure Steel Plate
- Alloy Steel Plate Hot Rolled ASTM A387 A514 A517 Pressure Vessel Steel Plate
- P265gh P275gh P235gh Boiler and Pressure Vessel Steel Plate
- Hot Rolled 4130 4140 4340 Alloy High Strength Steel Plate
- Hot Rolled A36 S235 S275 Carbon Steel Plate
- ASTM A299 Grade B Boiler Steel Plate
- Hot Rolled SA537 Cl1 Carbon Structural Steel Plate
- A633 A302 Hot Rolled Carbon Steel Plate
- ASTM A572 Gr. 50 A588 A633 Low Alloy High Strength Steel Sheet
- Wnm360 400 450 500 Abrasion Resistant Steel Plate
- Low Alloy High Strength Steel Plate EN S355m S355ml S355n S355nl
- A203 Low Temperature Pressure Vessel Steel Plate
- ASME SA515 SA516 SA537 High Temperature Pressure Vessel Steel Plate
Popular Searches
Recommended Products
- TA1/TA2/TA3/TC4/TA10 Titanium Alloy Rod/Bar
- MP35N/R30035/2.4999/R30075/ASTM F75 non-magnetic Nickel Alloy Rod/Bar
- ASTM A53 Gr.A &Gr. B Carbon ERW Steel Pipe for high Temperature
- 2J04/2J07/4J45/2J31/2J53/2J84/2J85 Permanent Magnet Nickel Alloy Bar/Rod
- 4J50/4J54/4J45/4J52 Expansion Nickel Alloy Bar/Rod Standard Specification
- 4J29/4J32/4J36/4J42/4J44 Nickel Alloy Rod/Bar Stock in Factory
- 6J24/6J12/6J40/alloy59/NS1403 Nickel Alloy Rod/Bar Stock in Factory
- 6J10/6J15/6J20/6J22/6J23 High-Precision Nickel Alloy Rod/Bar Can be customized
- NC035/NC030/NC010/CN44/NC040 Nickel Alloy Rod/Bar with film easy-to-tear
- NC012/NC025/NC003/NC005/NC050 Nickel Alloy Rod/Bar with film easy-to-tear
- 1J36/1J91/1J88/1J40/1J51 Soft Magnetic Nickel Alloy Round Rod/Bar
- 1J46/1J79/1J77/1J76/1J30 Soft Magnetic Nickel Alloy Round Rod/Bar ASTM/AISI
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Sheets
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- B2B Articles
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
JOEY ZHANG
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-