Screen printing binder HF-1801R

Specifications

HF-1801R
Name:pigment printing binder
Appearance:paste Solid Content:40+/-1% PH:6.0-7.0
Ion:Anion
Viscosity:2-5Pa.s

FuHua

Fabric printing binder super soft HF-1801R

 

 

 

Pigment Printing Binder HF-1801R

 

This product is our company newly developed high performance emulsion which can reach the world advanced level. It’s the self-crossling copolymer emulsion of butyl acrylate,acrylonitrile and other functional monomers at the radiation of cobalt 60 with some auxiliaries.It can reach the Europe and Japan environment standard.

 

 

 

1,Specification

 

• Appearance:milky paste
• Solid Content:40±1%
• PH:6-7
• Ion:Anion
• Viscosity:(25°C,4#rotor,60rpm)2-10Pa.s

 

 

 

2,Features

 

• Super soft hand feeling,similar to the dye printing
• Good washing fastenss,dry rub level 4,wet rub level 3.5
• Crosslinking at low temperature,no need to bake at the high temperature,energy saving,low carbon green
• perfect chemical and mechanical stability,can be compatible with many pigment printing ingredients

 

 

 

3,Application

 

• especially applied to the printings like beddings underwear which in high demand of hand feeling and washing fastness
• applied to screen printing,table printing,flat printing
• applied to the printing onto cotton,T/C fabric,hemp,chemical fiber and blended fabric

 

4,Usage

 

  10-30%,can be baked at 130°C for 3 minutes after natural drying.

 

 

 

5,Package and Transportation

 

• package:PE Drum with plastic bag inside,50kg125kg
• transportation:by buyer or seller
• storage:at the temperature of -5-40°C,in a dry and ventilated warehouse for more than 6 months

 

6,Note

 

• the binder which has been added into fixing agent and other agent should be use out within 24 hours
• baking at high temperature or adding into some fixing agent can enhance the washing fastness, but may affect the hand feeling and elasticity
• in some cases,if printing on the cotton,fixing agent is no longer needed,but should make a test sample before producing

 

The above information is confirmed by our engineer,for the practical application,pleas refer to the note before using.

 

•       comparison:

 

Item	Appearance	PH	Viscosity	Solid Content	Ion
imitated reactive pigment printing  binder HF-1801R	milky paste	6.0-7.0	2-5Pa·s	40±1%	Anion
imitated reactive pigment printing  binder HF-1802R	milky paste	6.0-7.0	2-5Pa·s	30±1%	Anion
imitated reactive pigment printing  binder HF-801R	milky paste	6.0-7.0	2-5Pa·s	40±1%	Anion
imitated reactive pigment printing  binder HF-802R	milky paste	6.0-7.0	2-5Pa·s	30±1%	Anion
Low temperature pigment printing  binder HF-1A	milky paste	6.0-7.0	2-5Pa·s	40±1%	Anion
Normal temperature pigment printing  binder HF-2	milky paste	6.0-7.0	5-10Pa·s	32±1%	Anion
High temperature pigment printing  binder HF-3	milky paste	6.0-7.0	5-10Pa·s	22±1%	Anion

      

 

 

Our products:

1,imitated reactive textile printing binder

2,normal textile printing binder (low temperature,normal temperature,high temperature)

3,rubber paste resin(10-series,30-series) 

4,textile printing thickener

5,rubber paste(white paste,clear paste,glitter paste,gold blocking paste)

 

 

 

Fuhua Products,you deserve!