Contact Platform Support
Help CenterTitanium Non-alloy Or Alloy Hexagon Rods For Sale
Related Products
-
Industry Using Gr1 Titanium Hex BarUS$ 20.00 - 20.00MOQ: 50 Pieces -
Titanium Hex /flat Bar per Price ASTM B348,AMS4928,ASTM F136US$ 20.00 - 20.00MOQ: 50 Pieces
-
Titanium Hex Bar for Making Implant Interventional MaterialUS$ 20.00 - 20.00MOQ: 50 Pieces
-
Commercially Pure Titanium Hex BarUS$ 20.00 - 20.00MOQ: 50 Pieces
-
Hexagonal Titanium BarUS$ 20.00 - 20.00MOQ: 50 Pieces
1.Tensile requirements
|
Tensile strength(min) |
Yeild strength(min) |
Elongation(%) |
||
ksi |
MPa |
ksi |
MPa |
||
Gr1 |
35 |
240 |
20 |
138 |
24 |
Gr2 |
50 |
345 |
40 |
275 |
20 |
Gr5 |
130 |
895 |
120 |
828 |
10 |
Gr7 |
50 |
345 |
40 |
275 |
20 |
Gr9 |
90 |
620 |
70 |
438 |
15 |
Gr12 |
70 |
438 |
50 |
345 |
18 |
2.Chemical requirements
Titanium Features
1. Excellent resistance to corrosive and erosive action of high-temperature acid steam and brine,
2. High strength
3. High resistance to pitting, crevice corrosion resistance
4. High strength to weight ratio
5.Weight saving possibilities
6. Low modulus, high fracture toughness and fatigue resistance
7. Suitability for coiling and laying on seabed
8.Ability to withstand hot/dry and cold/wet acid gas loading
Applicatons
1. Chemical industry
2. Petroleum chemical industry.
3. Textile printing and dyeing.
4. Condenser and heat exchanger.
5. Medical and health care.
Material Performance
GR1 used in deep drawing parts.
GR2 used in commercial.
GR3 only used in pressure vessel.
GR4 in some fittings parts and fastening part, not complex.
GR5 Ti6Al4V used in titanium alloys.
GR7 add palladium, most excellent c corrosion-resistence. corrosion-resistence.
GR9 Ti3Al2.5V most widely used in golf club and bicycle girder.
GR12 similar to GR7, cost lesser.
GR23 used in medical appliance.
Send Inquiry to This Supplier
You May Also Like
-
Customized Factory Direct Water Weed Cutting Boat In The RiverUS$ 30,000 - 100,000MOQ: 1 Set
-
YDS Cryogenic Container/tank/dewar for Liquid NitrogenUS$ 168 - 678MOQ: 1 Piece
-
SS304 Two Motions Reactor Vessels With PlatformUS$ 1,000 - 10,000MOQ: 1 Set
-
Plastic Diesel Oil Tanks , Fuel TanksUS$ 25 - 85MOQ: 1
-
Pressed Carbon Steel Shell Segment for Pressure VesselUS$ 500 - 10,000MOQ: 1 Set
-
Stainless Steel SS304 316L ReactorUS$ 2,000 - 50,000MOQ: 1 Set
-
Safe SF6 Gas Cylinder With Different Voloume Liter and kgUS$ 350 - 520MOQ: 1 Piece
-
Alloy 400 1800 Psi Single Ended 1/8 1/8" Female NPT Gas Sample CylindersUS$ 150 - 300MOQ: 1 Piece
-
Tin-plated and Aluminum CansUS$ 0.1 - 0.2MOQ: 30000 Pieces
-
Co2 Cartridge CylinderNegotiableMOQ: 20000 Pieces
