Digital printing plate,Press CTP plate

Specifications

CTP plate
Gauge: 0.15-0.40mm
Maximum Short Grain Width: 1260mm
Spectral Sensitivity: 830nm
Exposure Energy: 130-150mJ/cm2

Digital printing plate,Press CTP plate 

 

Gauge: 0.15-0.40mm

Maximum Short Grain Width: 1260mm

Spectral Sensitivity: 830nm

Exposure Energy: 130-150mJ/cm2

Resolution: 1-99%@250lpi

FM Capability: 20um stochastic

Processors: Any suitable processors for positive thermal CTP plates 

Developer: Recommended to use  Kodak Developer

Developing Temperature: 20-22centigrade

Developing Time: 20-25seconds

Replenishment Rate: 60-100m/SQM

Plate Finisher: Recommended to use 140G plate finisher

Baking Conditions: Apply for 140B baking gum and suitable to any CTP plate baking gum

-Static Oven: 220-230centigrade for duration of 3-5minutes

-Online Oven: 240 centigrade for duration of 4minutes

Safelight: Daylight handling    Digital printing plate,Press CTP plate | Digital printing plate,Press CTP plate | Digital printing plate,Press CTP plate 

 

 

  

  

  

  

  

 

Run-length: 100,000impressions unbaked, 500,000impressions post-baked. Actual run length may vary according to press, ink and paper conditions

Normal Package: Packed in carton with waterproof paper and backing paper among the plates to protect them from scraping. 

Shelf Life: 12months under recommended storage conditions

Transport and Storage: Store plates flat at normal temperature with relative humidity between 40% and 70%