innovative products tungsten carbide studs and spikes tire

1.Wildly used in cold and wet field, tires, shoes, skiing sticker etc.

2.The specification based on the different slot.

3.Easy to install and remove.

4.Low ground pressure-environmentally with minute impact.

5.Top quality and long life time.

How to use

A correctly inserted stud will only have its carbide pin protrude past the tire surface after the tool is removed. The tread rubber compresses around the stud's flat head (inserted into the bottom of the hole) to hold the stud in place

the new tire studs can be easily installed and removed without professional installation tools,it can also be disassembled according to the season,when not being used in the snow tire studs could be remover lightly and stored for use again in the following season,choose appropriate size of new studs in the installation process in terms of the depth if tire thread.

material:  steel body and carbide pin

Surface:  zinc plated size:  various
unit weight:  about 2.0g

The ONLY biggest tire studs manufacturer in Wenzhou, with full-automatic machine to process.

--zinc plated for rust protection

--large stock and fast delivery

--all the specifications can be used in cars

--samples will be given upon the inquiry

Production details:

100% quality guarantee customized tungsten carbide tire studs, tyre nails

1.center of tyre studs:

Chemical composition: WC-95%+Co-5% (YT5)
Density: (g/cm3):13.0-13.5
Hardbess HRA :>90(>1300HV30)
TRS Mpa:(N/MM2):1660
Poposity :(ISO):<A02B02
Free carbon and and Graphite phase :<C00
N phase :E00
grain size : (um):1.2-1.8
index of abrasive resistance :71+/-7.5
the center color: black                                                                                                            

2.cloth of tyre studs
Materia : low carbon steel  YG10/YG15/YG10X ect
Surface covering  : galvanizing