Contact Platform Support
Help Center16 Inch Spur Gear Slewing Drive for Engineering Construction Machinery
Related Products
-
Titanhorse 16 Inch Spur Worm Gear Slewing Drive for Delivery EquipmentUS$ 100 - 300MOQ: 1 Set -
Slewing Drive for Automatic Turntable MachineUS$ 300.00 - 300.00MOQ: 1 Piece
-
Gear Reduction Slew Drive With EncoderUS$ 200 - 4,000MOQ: 1 Set
-
Horizontal Tracking Slewing DriveUS$ 670.00 - 670.00MOQ: 1 Piece
-
Dual Axis Slewing Drive for Stirling Solar Thermal Power GenerationUS$ 300.00 - 300.00MOQ: 1 Piece
Enclosed slewing drives are the most popular model of Titanhorse’ slewing drives and can help power movement in machinery such as wind turbines, military equipment, digger derricks, solar trackers, medical equipment, forestry, waste management and industrial positioners. The housing fully encapsulates all the drive components such as the double enveloping worm gearset, planetary gearing, and turntable bearing, such that they have total protection from the elements. The Enclosed Drive is also advantageous if you’re mounting inside so as not to see the parts in motion, or to avoid injuring workers working in close proximity.
Slewing drives are ideal for jobs that require both load-holding and rotational torque from the same gearbox. The fully-enclosed comes with Titahorse’ patented hourglass worm technology, or cone drives and double enveloping worm gearsets where required, for maximum load-holding and efficiency. Each size is rigorously tested for reliable performance, with base model sizes producing 6kNm to 2200kNm of holding torque, 200Nm to 630kNm of output torque, 500Nm to 2710kNm of overturning moment load capacity, and gearbox reduction ratios of 30:1 up to 156,600:1.
SPE spur drive slew gear reducer
TITANHORSE Slewing Drive:
1. Own ring forging plant, gurantee your orders delivery on time with lower cost.
2. 5S whorkshop management, ISO standard, make sure all the slewing drives exported with high quantity.
We have 3'', 5'', 7'', 9'' even 21'' five sizes dual axis slewing drive, and 3''-25'' nine sizes single axis slewing drive.
Friendship Recommendation
- Vertical installation
It is advised to mount the slewing drives referring to attached drawing upside in solar applications for better protection.
For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.
- Horizontal installation
It is advised to mount the slewing drives upside down on the azimuth axis in solar applications for better protection and add protection for the elevation axis.
For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.
Spur gear drive have more torque and outpuut speed than other standed slewing drive
.
The detalied information about the spur gear dirve as below;
Generally, we use the standed wooden case to shipping slewing drive.
Send Inquiry to This Supplier
You May Also Like
-
Dual Axis Slewing Drive for Dish-Stirling Solar Power Generation SystemUS$ 300.00 - 300.00MOQ: 1 Piece
-
Slewing Drive With 24v dc Motor for CPV Concentrated Solar Power GenerationUS$ 300.00 - 300.00MOQ: 1 Piece
-
Slewing Drive for CPV Solar Tracking SystemUS$ 350.00 - 350.00MOQ: 1 Piece
-
Slewing Drive for Automatic Turntable PlatformUS$ 300.00 - 300.00MOQ: 1 Piece
-
Enclosed Dual Axis Slewing Drive Worm Gear Used for Solar CSPUS$ 200 - 500MOQ: 1 Set
-
3 Inch Dual Axis Slewing DriveUS$ 200 - 4,000MOQ: 1 Set
-
3" Enclosed Dual Axis Slewing Drive Used in Antenna(with Centre Hole)US$ 200 - 500MOQ: 1 Set
-
Tower Solar Tracking System Use 2 Axis Slewing DrivesUS$ 200 - 5,000MOQ: 1 Set
-
Antenna Use 2 Axis Slewing DrivesUS$ 200 - 5,000MOQ: 1 Set
-
Vertical Slewing Drives Used for Solar CSPUS$ 200 - 3,000MOQ: 1 Set
