Contact Platform Support
Help Center4W Wifi Amplifier,outdoor Wifi Amplifier Cover 4 Kilometer Wifi Amplifier
Related Products
-
Longer Distance 2.4g Wireless Wifi Signal Booster Best Selling 2w Wifi Signal BosterUS$ 1 - 30MOQ: 5 Pieces -
Indoor Wifi Signal Booster Easy Install Wifi RepeaterNegotiableMOQ: 2 Pieces
-
Wifi Booster High Frequency 2.5w Indoor Wifi Booster for Wireless DeviceNegotiableMOQ: 5 Pieces
-
Wifi Booster 2.5w Indoor Wifi Booster to Enhance Wifi SignalNegotiableMOQ: 5 Pieces
-
Long Range Wifi Repeater High Speed 5watt Wifi Booster 37dbmNegotiableMOQ: 3 Pieces
Specifications
long distance coverage High power wifi amplifier1:Antenna Interface:RP-SMA Male
2.2.4-2.49ghz.
3.full sets.
4W wifi amplifier,outdoor wifi amplifier cover 3 kilometer wifi amplifier
| Operating frequency | 2400-2483.5MHz |
| Operating mode | TDD (Time-division duplex) |
| Signal standard | IEEE 802.11b/g/n |
| Minimum input power | 3dBm |
| Maximum output power | 36 dBm(4w) |
| Uplink gain | 15±1dB |
| Downlink gain | 10dB - 17dB adjustable |
| (8dB attenuation range in 1dB steps) | |
| Noise figure | ≤ 2.5dB |
| Delay | <1uS |
| Operating temperature | 25°C to + 60°C |
| Weight | 0.6kg |
| AP/Router Interface | SMA Female |
| Antenna Interface | RP-SMA Male |
Instructions :
1: Connect Antenna to the Wi-Fi Booster.
Caution: The Booster antenna interface can only connect antenna, Don’t connect to any other wireless products in any case, otherwise it will result in equipment malfunction or damage.
2: Connect Wireless AP/Router or Wireless Network Card to the Wi-Fi Booster.
Tips: Users can also use other shielded cables to connect, but the cable length should be as short as possible, preferably not exceeding 3m.
3: Power up the Wi-Fi Booster.
At first, the Light of the LED is very dark. When the data is being transmitted, the light will become very bright. The more dense data transmission, the more bright light.
Caution: Before Power up the Wi-Fi Booster, you must Power up the AP/Router first.
4: Adjust the Antenna position and angle, make the Wi-Fi Booster achieve the best performance.
Attention
1: The default Downlink gain is 13dB, It is not the higher the better, You must ensure that the final transmit power must not be larger than 36dBm (4w).
2: The Downlink gain is too high may cause the booster not work correctly, The wireless link cannot be successfully connected, or even lead to the booster damage.
3: You need to reduce the Downlink gain when it's combined with a high-power AP/Router.
4: You need to increase the Downlink gain when it's combined with a low-power AP/Router.
Send Inquiry to This Supplier
You May Also Like
-
Office Wifi Wlan Receiver Booster,wifi Signal Booster,wlan Booster,easy InstallationUS$ 1 - 100MOQ: 5 Pieces
-
4W Wifi Repeater,outdoor Wifi Signal Booster for Easy Install,wifi Signal BoosterUS$ 1 - 200MOQ: 5 Pieces
-
Outdoor Waterproof 2.4GHz 4w Wifi Booster RF600 Lintratek Brand Wifi Signal RepeaterNegotiableMOQ: 5 Pieces
-
Outdoor Waterproof 2.4GHz 4 Wifi Booster RF600NegotiableMOQ: 5 Pieces
-
Factory Sell 2w Wifi Repeater, Wifi Signal Booster Full SetUS$ 1 - 50MOQ: 5 Pieces
-
2W 33dbm Simple Installation Wifi Repeater, Poor Wifi Signal SolutionUS$ 1 - 50MOQ: 5 Pieces
-
Mini Small Size WIFI 2.4G Internet Wifi Booster Repeater, Wifi Antenna BoosterNegotiableMOQ: 5 Pieces
-
WIFI 2.4G Internet Wifi Booster Repeater, Wifi Antenna Booster,Router Signal BoosterNegotiableMOQ: 5 Pieces
-
2.4ghz Wireless Wifi Repeater,5w Wifi Repeater,wifi Antenna RepeaterUS$ 1 - 50MOQ: 5 Pieces
-
4000mw Wifi Signal Booster, 2.4ghz Outdoor Waterproof Wifi BoosterUS$ 1 - 45MOQ: 5 Pieces
