antenna amplifier small size 1700mhz/ mobile signal booster for home office use/ AWS cell phone signal receiver

antenna amplifier small size 1700mhz/ mobile signal booster for home office use/ AWS cell phone signal receiver

Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.

Unfortunately, there are still some places where they can find themselves “out of coverage” ,no signal at all... Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:

• Parking lots, tunnels
• Big stores, office buildings
• Cars, boats etc.

•The outside antenna catches low signal from operator servicer’s base station and delivers it to cell phone repeater through the connection cable (coax).

•After the signal is accepted by the mobile repeater, this device amplifies it.

•Then this amplified signal goes through the connection cable (coax) to the inside antenna.

•And after that, the amplified signal transmits to your cell phone.

• Finally, your cell phone will get good signal, never on and off.

A regular cell phone repeater consists of: (full kit)

• 1 -Outdoor antenna log periodic antenna(or wall mounted, yagi antenna)
• 2 - Indoor Omni ceiling antenna( panel antenna)
• 3 – Power adapter
• 5 - User manual
• 6 - Cell phone repeater
• 7- 10 meters outdoor cable and 1 meter indoor cable 

                                                                    Specification 

   

  Model No		KW17A-AWS mobile signal booster
  Parameter data		Uplink	Downlink
  Frequency Range	AWS	1710-1755 MHz	2110-2155MHz
  Output Power		17 ±2dBm	17±2dBm
  Gain		60 ±2 dB	65±2dB
  Bandwidth		40M
  Ripple in Band		AWS≤5dB
  Spurious Emission	9KHz~1GHz	≤ -36 dBm
  	1GHz~12.75GHz	≤ -30 dBm
  VSWR		≤3
  MTBF		>50000 hours
  Power Supply		AC:100~240V, 50/ 60Hz;DC:5V 1A
  Power Consumption		< 5W
  Impedance		50 ohm
  Mechanical Specification
  RF Connector		N-Female
  Dimensions (D*W*H )		135*105*26 (mm)
  Net weight		< 0.6Kg
  Packing size (D*W*H )		250*240*65(mm)
  Gross weight		< 0.7Kg
  Installation Type		Wall Installation
  Environment Conditions		IP40
  Humidity		< 90%
  Operating Temperature		-10°C ~ 55°C