best tools torque wrench,labor saving wrench, torque wrench,tire repair equipment,truck tyre wrench,manual torque wrenchBD-88

Specifications

we can provide good torque wrench with reasonable price.
the biggest security output torque 6800N.M

Less power plank BD-88style is adopted high-speed planet as its main drive. it can make less power into producing large output Wring Square. Its output wring square can be at 5000 Newton per meter. It like use 40 kg powers on the 6 meters long stalk. The products chose senior alloy steel and excellent heat techniques. It is firmly and well used. The surface is polished and plating plastic. It has excellent handle feeling. It is well used in removing all kinds of auto car tyres.

 

 

Model no	Gear ratio	Maximum Output torque	The length form input to output	Sockets Quantity/pcs	Weight/pcs KG	Quantity ctn	Carton size(cm)	Main material
BD-16A	1:16	>3200N.M	160mm	3	2.1	5sets	43×29×22.5	40CR
BD-16B	1:16	>3200N.M	160mm	3	2.2	5sets	43×29×22.5	40CR
BD-58A	1:58	>4800N.M	270mm	3	8	4sets	38×38×21	40CR
BD-58B	1:58	>4800N.M	270mm	2	7.3	4sets	38×38×21	40CR
BD-58C	1:58	>5000N.M	270mm	8	12	3sets	39×30×32	40CR
BD-58D	1:58	>5000N.M	270mm	2	7.5	3sets	38×31×24.5	40CR
BD-58E	1:58	>4800N.M	310mm	2	8	4sets	41×37.5×21.5	40CR
BD-58F	1:58	>5000N.M	310mm	2	8.3	4sets	41×37.5×21.5	40CR
BD-68A	1:68	>6200N.M	270mm	2	8	3sets	38×31×24.5	40CR
BD-68B	1:68	>6800N.M	310mm	2	8.5	3sets	40×30×23.5	40CR
BD-68D	1:68	>7000N.M	270mm	2	10	3sets	45×39×23	40CR
BD-78	1:78	>7500N.M	270mm	2	10.5	3sets	42×34×24	40CR
BD-88	1:64	>6800N.M	320mm	2	10.5	3sets	36×32.5×23.5	40CR

 

 

1.Put the socket into square toes of the handle end, put the shock shank into the other end,

2.Put the socket into the nut when it is disassembled or firmed, pay attention to the direction of looseness and tightness, rock the shock shank, let the handle be closer to the bolt side.

3.After loosed the nut, change to use extension Bar to speed disassemble . Opposite, use extension Bar to spin into, then use labor saving spanner to spin tighten.

4. The normal disassembled (fastened)the nut needed maximum output torque 1200N.M(to be equal use 40 kilograms strength on 3meter thrust augmentation poles)the rocking bar to pull the strength is 18 kilograms strength.

Notice

 

1.       when tighten nuts, not be over 20KG. The nut will be in place when the rocker is rebounded half circle. Or the rocker is opposition.

2.       Do not take this tool as beating tools.

3.       Do not put sleeve on the rocker or plus power after kno-cking,

4.       Warmly attention:The nut can not be moved if used more power, please pay attention to the direction, and confirm the direction.