2015 newest type JPD-800B CE marked Multiparameter patient monitor 15" ,patient monitor for sales

Jumper Multi-parameter Patient Monitor JPD-800B CE approved 15Inch

 15 inch TFT; Resolution: 1024*768
ECG , Spo2 , PR , NIBP , RR , Temp

Function

6 display interface                                
720 hours trend data storage, 12 hours waveform review
Voice alarm
Support wired and wireless networking
Support software upgrade online
ST segment can be adjusted                                                                                                                                
Support nurse call system  

Specification

ECG
Leads Mode; 5 leads;
Gain(mm/mV):         1/4,1/2,1,2,4
Scanning speed;      12.5mm/s,25mm/s,50mm/s
Frequency response: diagnosis 0.05-130Hz
                 Monitoring 0.5 – 40Hz
                 Operation  1.0- 20Hz
Heart rate range:   15-350 BPM
Heart rate accuracy:±1%
ST segment analysis:-0.8-+0.8Mv
ST segment accuracy:±0.02Mv
 
NIBP
Measure and Alarm Range
Adult Mode
SYS   40 ~ 280 mmHg
DIA   10 ~ 220 mmHg
MEAN  20 ~ 240 mmHg
Pediatric Mode
SYS   40 ~ 220 mmHg
DIA   10 ~ 160 mmHg
MEAN  20 ~ 170 mmHg
Neonatal Mode
SYS   40 ~ 135 mmHg
DIA   10 ~ 100 mmHg
MEAN   20 ~ 110 mmHg
Static pressure range: 0~300mmHg
Static pressure accuracy: ±3mmHg or 2%
Resolution: 1mmHg
Protection mode; dual over voltage protection
 
SPO2
Measure range: 1-100%
Accuracy:      ±2% (70-100%)
Resolution:    1%

Pulse rate
Measure range: 20-300 BPM
Accuracy:     ±2 BPM
Resolution:    1 BPM
 
Temperature
Channel;       2
Measure range: 0-50 °C
Accuracy:     ±0.1 °C
Resolution:    0.1 °C
 
Respiration
Measure range; Adult               0~120BrPM
             Pediatric/ Neonatal    0~150BrPM
Accuracy: ± 2%
Resolution: 1 BPM

 
IBP(optional)
Accuracy (no sensor); ±2%or1mmHg
Band width:   Normal mode: DC~40Hz
             Smooth mode: DC~12.5Hz
 
ETCO2(optional)
Measure range: 0% - 13%
Resolution: 1 mmHg
Accuracy : ±2 mmHg @ 5.0% CO2 (at ATPS)
Respiration: 3 – 150 bpm
• Depth of anesthesia (optional)
EEG sensitivity     ±400μV 
Noise              2μVp-p , 0.4μV RMS,1-250Hz
CMRR               100Db
Input impedance    50Mohm
Sample rate      2000 samples/sec.(14 bits equivalent)
CSI and update   0-100.Filter 6-42Hz,1 sec.update
EMG            0-100logarithmic.Filter75-85Hz,1sec.update
BS%             0-100%.filter 2-42 Hz,1 sec.update
 

Option

Lead-acid battery (extermal plug)
Recorder (built-in)
IBP                                                   
ETCO2
monitor depth of anesthesia
anesthesia gas monitoring
oxygen monitoring