Chinese Uniaxial Plastic Geogrid Installation

Specifications

1. Material: PE/PP/Plastic
2. Certificate:ISO9001:2000
3. High quality, Low price...

Product Introduction
        The uniaxial geogrid is formed by extruding the macromolecule polymer into sheet, and punching the sheet into
regular net, then stretching the net longitudinally. This process makes the polymer into a state of linear orientation, and forms long oval-shape integral net structure with uniformly distributed nodes of high strength. Such structures possess very high tensile strength and tensile modulus, and provide an ideal chain system for bearing and spreading the force in the soil. It is a kind of reinforcement material widely used currently. 

Applications
       The geogrid product is suitable for reinforcement of embankment, subgrade, slope and tunnel wall, and reinforcement of permanent foundation, such as large airport, parking lot, dock, and so on.
1. Increase the bearing capacity of the road (ground), and prolong the service life of the road (ground).
2. Protect the road (ground) surface from subsiding or cracking, and keep the road (ground) beautiful and neat.
3. It is convenient for construction, which can save time and labour force, and reduce the maintenance cost.
4. Protect the culvert from cracking.

Type Item		TGDG25	TGDG35	TGDG50	TGDG80	TGDG110	TGDG120	TGDG150
Width(mm)		1100
Length /roll (m)		50
Yield strength ≥KN/M	HDPE	25	35	50	80	110	120	150
	PP	25	35	50	80	110	120	150
Elongation	HDPE (%)	11-16
	PP≤ (%)	10
Strength at 2% elongation ≥KN/M	HDPE	6	9	10	23	30	35	46
	PP	7	10	12	26	32	38	48
Strength at 5% elongation ≥KN/M	HDPE	12	18	25	44	60	70	87
	PP	14	20	28	48	64	75	93
Price FOB Qingdao USD/sq.m	HDPE	0.59	0.76	1.07	1.48	1.87	2.05	2.79
Load qty Per 40’container sq.m	HDPE	28000	28000	27500	20000	13000	12000
	PP	33000	33000	32000	27500	20000	15400	11550
Remarks: The price will be made according to our final confirmation.