Contact Platform Support
Help CenterRemote Control Wireless Wall Switch Wireless Self-powered Wireless Wall Switch 50 Meters Long Distance 433MHz
Related Products
-
P1 Remote Control Wireless Socket With High End 433MHz Kinetic Transmitter Wireless SocketUS$ 8.5 - 11MOQ: 200 Sets -
E2 High- End Battery- Free Wireless Doorbell Waterproof Doorbell Approved by CE RoHS DoorbellUS$ 5 - 6MOQ: 500 Sets
-
Remote Control Wireless Socket Remote Control Wireless Socket 433MHz Wireless SocketUS$ 8.5 - 11MOQ: 1000 Sets
-
Wireless Wall Switch Self-powered Wireless Switch 433MHz Switch 50 Meters Long RangeUS$ 13 - 15MOQ: 500 Sets
-
High- End Battery Free Wireless Doorbell 110meters Long Range Distance DoorbellUS$ 8 - 9MOQ: 100 Sets
remote control wall switch with wireless self-powered wireless wall switch
specifications of no cabling self-powered kinetic wireless wall switch :
AS 6N |
Receiver |
Transmitter |
Power Supply |
AC 180V~260V(50/60HZ) |
Self-powered |
Operating Temperature |
-10℃~+50℃ |
-40℃~+50℃ |
Range (Open Field) |
50m |
|
RF Frequency |
433MHz |
|
Power Consumption |
<700mW |
- |
1000W |
- |
|
Operating Force |
- |
<4N |
Dimensions |
66*41*27 mm |
86*86 *17mm |
Weight |
35 g |
58g |
Advantage / features of no cabling self-powered kinetic wireless wall switch :
- No battery
- No cabling
when you arranging the decoration,you can use without cabling.
- Save labor cost
when you setup,you can not need wireman to do anything,just 1 minute to set up by yourself.
- More environmental protection
- More convenient
If you were reading a book in your warm bed on a cold winter's day ,when you need to turn on or off the light, just press the button. you will feel very convenient,and don’t worry about the battery exhausted.
pictures of no cabling self-powered kinetic wireless wall switch :
Operating instruction:
1)work mode
The receiver has been paired to the transmitter before they left
factory. After installation, it's ready to work
2) Learn mode
The remote transmitter has been paired to the receiver at factory.Unless you need to add additional receiver or transmitter,you don’t need to re-paired it.
1.Long press the round button on the center of receiver for 5 seconds
2.Press the transmitter twice in one minutes,and then you can see that they are paired.If not,press the transmitter twice again.
3.Complete and exit the learn Mode automatically.
Note:
No operation in 1 minute or short press button once, the receiver
will exit Learn Mode.
About our company:
We are the manufacturer to reseach and supply for 5 years,and we specialize in kinetic wireless doorbell,self-powered remote control wireless wall switch and self-powered remote control wireless socket.Our technology introduction is: betteryless wireless doorbell/switch/socket requires no battery and no wire.It uses the nuique energy harvesting technology and ultra-low-power wireless techmology with worldwide patents pending.
We are the first one in the world to ues without battery and cabling,and expend the Market,please support us.
If you have any questions ,you can contact us:
QQ: 3334299558
Skype: alan xiong
Tel: +86 532-86769488
Mobile: +86 15865534367
Fax: +86 532-86881057
Web: /
Send Inquiry to This Supplier
You May Also Like
-
Wall SwitchNegotiableMOQ: 2000 Pieces
-
Electric Wall Switches Sockets and Boxes Stocklots AvailableUS$ 0.3 - 0.4MOQ: 25000 Units
-
IP65 Waterproof 110 Volt Electrical Plugs and Socket English StyleUS$ 0.1 - 100MOQ: 100 Units
-
White Plastic Wall Mounting Box For AU/US Standard Home Light SwitchUS$ 1.5 - 2.5MOQ: 1000 Pieces
-
Custom High Quality Plastic SwitchUS$ 0.01 - 2MOQ: 1000 Pieces
-
S11-3774110 Hot Sale Headlight Switch for CheryUS$ 4.85 - 5.8MOQ: 100 Pieces
-
Voice Delay SwitchUS$ 1 - 5MOQ: 5 Pieces
-
WALL PLATE VGA Female & USB Female & 3.5Stereo Famale & RCA Female Face Plate and Wall SocketUS$ 5 - 6MOQ: 1000 Pieces
-
Wall Switch Socket Antenna Part Anchor TypeUS$ 0.1 - 10MOQ: 1 Piece
-
New Design 2 Pin and 3 Pin Socket With Wall Switch Manufactured in ChinaUS$ 17 - 18MOQ: 1000 Pieces
