industrial water tube structure hot water boilers for distillery

  industrial water tube structure hot water boilers for distillery

1.Introduction of industrial water tube structure hot water boilers for distillery

SZL type is a double drum, water tube, assembly travelling grate boiler(A type layout). The boiler body has an upper drum and a lower drum vertically arranged along the boiler center. The front of upper drum and water wall tube on two sides form a hearth heating surface, and the tubes between the rear of the upper drum and the lower drum form a convection heating surface. The economizer is arranged the rear of the boiler, and high temperature fume produced by burning was sucked partial heat in the hearth, enters the convection heating surface for heat transfer through the cooling room and is sent into the chimney by the dranght fan through the economizer and deduster and discharges into atmosphere.

2. Product show of industrial water tube structure hot water boilers for distillery

3. Technical datasheet of  industrial water tube structure hot water boilers for distillery

4. Advantages of  industrial water tube structure hot water boilers for distillery

1).It designs whirlwind burning chamber structure,  through high speed whirl , mixed burning and smoke separation of high temperature fume to reach the effect of dust removing, energy saving and environmental protection.

2).With large volume hearth and strong adaptability of coal, it can use various biomass as the fuel.

3).It has large heating surface, which can rapid boost, sufficient capacity and low energy consumption.

4).Sending as a entirety makes the installation time short.

5.Our certificates

6. Customers visist our factory