AISI 304 Stainless Steel Angle Bar

Specifications:AISI 304 Stainless Steel Angle Bar

Chemical Composition:AISI 304 Stainless Steel Angle Bar

Product Picture:AISI 304 Stainless Steel Angle Bar

Production Flow:AISI 304 Stainless Steel Angle Bar

Raw materials are sending to hot rolling units for rolling into different sizes

• Hot rolled material is annealing in cold;rolled annealing furnace and pickling in acid.
• All mill rolls are grinded on precision grinding machine with proper chamfering after first shiftoperation.
• All sheets are picked in different tanks and dried on brush roll machine before dispatched.
• These sheets are again annealing and are sent to straighten machine for straightening.
• Inspectiions are done at various stages.Keep proper control overall internal process via rolling,annesling and picking by our experienced staff.

 Application:AISI 304 Stainless Steel Angle Bar

Stainless steels of  various kinds are used in thousands of applications.The following gives a flavour of the range 

1. 1.Domestic                                      cutlery,sinks,saucepans,washing machine drums,microwave open liners ,razor blades
2. 2.Transourt                                      exhaust systems,car trim/grilles,road tankers,ship containers,ships chemical tankers
3. 3.Oil and Gas                                  platform accommodation,cable trays
4. 4.Medical                                          Surgical instruments,surgical implants,MRI scanners.
5. Food and Drink                               Catering equipment,brewing,distilling,food processing
6. Water                                                 Water and sewage treatment,water tubing,hot water tanks
7. General                                             springs,fasteners(bolts,nut andwashers),wire
8. Chemical /Pharmaceutical            pressure vessels,process piping
9. Architectural/Civil Engineering      cladding,handrails,door and window fittings,street furniture,structural,sections,reinforce                                                             ment bar,lighting columns,lintels,masonry supports.

 Packing picture

Standard export sea-worthy packing.

 Manufacturing Process:AISI 304 Stainless Steel Angle Bar

Raw materials are sending to hot rolling units for rolling into different sizes.

→Hot rolled materials is annealing in cold rolled annealing furance and picking in acid.

→All mill rolls are grinded on pre cision grinding machine with proper chamfering after first shift operation.

→All sheets are pickled in different tanks and dried on brush roll machine before dispatched.

→These sheets are again annealing and are sent to straighten machine for straightening.

→Inspections are done at various stages.Keep proper control overrall internal process via rolling,annealing andpicking by our experienced staff.

Stainless steel maintenance:AISI 304 Stainless Steel Angle Bar

‹1›Regular cleaning and maintenance

‹2›Pay attention to prevent the occurrence of the phenomenon of scratches

‹3›Use soap,weak detergent or warm water to remove surface dust,dirt

‹4›In addition to the surface of the binder with alcohol or an organic solvent(ether,benzene)

‹5›Use neutral detergent or ammonia solution in addition to surface oil

‹6›With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt

 Company information:AISI 304 Stainless Steel Angle Bar

Wuxi Zhongxingwei Special Steel Co.,Ltd.

Zhongxingwei Special Steel company began domestic trade since 80s ,now we also sell stainless steel aborad.

We are the agent of TISCO,BAOSTEEL,LISCO,JISCO,ZPSS

Our main products are stainless steel inox sheet/plate,coil/roll,strip,bar,angle,pipe and tube.

Grades—201,202,304,304L,316,316L,310S,309S,301,321,904L,410,420,430,409

Surface—2B,BA,No.4/HL/Hirline/brushed/satin,8K/No.8/mirror,SB,gold,etch,No.1,polish,etc

Thickness—0.2-6mm for cold rolled;3-150mm for hot rolled.

Standard size—1000*2000mm,1219*2438mm=4ft*8ft=1220*2440mm,

                         1250*2500mm,1500*3000mm/6000mm,1524*6096mm.

Certificate—ISO,BV,SGS,TUV,IQI or other third inspections.

Package—wooden pallets without fimugated,iron pallets,water proof papers.

                 interleaved paper,pvc film,20'GP or 40'GP container.

Delivery time—5-7 days for standard sizes,less than 100Tons,

                        other quantity is as the actual situations.

 FAQ:AISI 304 Stainless Steel Angle Bar

small quality, short time delivery

If we have stocks the delivery time is less than 7 days,If the quantity more than 500Tons, the delivery time is about 30 days after confirming the order.

Choose the appropriate metals stainless steel for your needs.

We carefully balance quality,delivery time and prce,procure various grades metals from all over the world

Lower total cost

We taking your processing into accout,offer you reduce a total cost by using our product.

We assure you:

Small MQQ + Cheap Price + Fantastic Quality + Fast Delivery

contact me

Tim tian

 whatsapp:86-15896380486

Wuxi Zhongxingwei stainless Steel Co., Ltd